REXING R88 Dash Camera

The information in this manual is subject to change without notice.

Overview

Thank you for choosing REXING! We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
care@rexlngusa.com
D ca17) 140.aoo4
Our support team will respond to you as soon as possible. Always a surprise with Rexing
Check us out here.

•  https://www.facebook.com/rexingusa/
•  https://www.instagram.com/rexingdashcam/
•  https://www.rexingusa.com/support/registration/

What’s in the Box

1. Rexing R88 Dosh Com
2. Car Charger
3. Warning Sticker
4. Coble Management Tool
5. Rear Camero
6. Coble Clips
7. User Manual
8. Electrostatic Sticker
9. 128 GB MicroSD Cord
10. Type-C Smart Hardwire Kit

Camera Overview

1. USB C Charging Port
2. Power Button with indicator
3. Rear Camera Port
4. Micro SD Card Slot
5. Front Camera

The device is charging or pow8fed on when the indicator is solid purple.

Screen Icons

1. Recording (On) 9. GPS Status (Connected)
2.  Recording Time (Current Clip) 10. Microphone (On)
3. Dote (Current) 11. Wi-Fi (Off)
4. Time (24-Hour Format) 12. G-Sensor Level
5. Start/Stop Recording 13. Exposure
6. Toke Photo (when recording is ON) 14. Loop Recording
7. enu (when recording is OFF) 15. Recording Mode
8. File Lock (Manual)
9. MicroSD Cord (Inserted

lnstalatlon 

Installing the Electrostatic Stickers

Prepare Your Windshield

Thoroughly cleanse your windshield with either water or alcohol. Follow this by wiping it dry using a clean, dry cloth to ensure a spotless surface.

Position the Slicker

Next, carefully peel off the protective film from the electrostatic sticker. Attach the sticker to the windshield, ideally behind the rear-view mirror. This position is recommended to ovoid obstructing your view while you’re on the rood.

Install the Dash Cam

Place the dash com onto the windshield and properly orient the mount piece to the roof and hood line of the vehicle.

Insert the Memory Card

The Rexing R88 accepts [Class 10/ UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you con begin recording. Before Inserting or removing a memory card, first ensure you’ve powered down the device.
Gently push the memory card in until you hear a click. and allow the spring release to push the card out .

Power the Camera and Format the Memory Card

Power the camera by connecting the charger to the car cigarette lighter and the camera To ensure the R88 records to your memory cord properly and without error. Betore you start using a new memory card, you must tormal the card within the camera using the formal function. Always backup important data stored on the memory card before formatting. To format the memory card, make sure you hove inserted your memory cord, then turn on the device by connecting lo a power source. Top the II):] button to end recording. Then tap the ■ icon to enter the system setup menu, and top Setup. Use the UP and DOWN buttons to navigate to the Format option, then top OK to confirm the selection.

You may now disconnect from power. The camera will shut down alter 3 seconds. The camera should begin recording automaffcally the next time II Is powered on.

Mount the Rear Camera 

Mount the rear cameras as shown below. Use the provided camera coble to connect the rear cameras to the front camera.

Installing the Camera onto the Windshield

• Carefully route the power coble around the windscreen and tuck in under the trim.
• Plug the Car Charger Coble into a 12V DC power outlet or the car cigarette lighter.
• Connect car charger to the camera. The camera will auto-start recording once powered on.

Basic Operation

Device Power

• The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e.: the vehicle is started).
• To turn the device on manually.press and hold the POWER button until the welcome screen appears.
• The camera will automatically start recording when powered on.

Menu Settings
Power the comera on. If the camera is recording, tap the [BJ icon to end recording. Tap the ■ icon once to enter the setting menu for a mode. Then tap the Setup button to access the System Settings .

Video Recording
The camera will automatically begin recording when it receives power. A blinking red dot and indicator icon will appear on the screen while recording is in progress. Top the [Bl icon to end the recording.

Video Playback
You con view recorded videos directly on the device or on a computer. To ploy a video on the device, top the II icon to enter Playback mode. Use the UP and DOWN icons to navigate to the desired video, then top the OK icon to begin playback.

During playback use the OK (pause), DOWN (fast forward), and UP (rewind) buttons to control the video playback. To playback a video on the computer, either use an SD card adapter.

To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.

Parking Monitor (Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged.

We kindly suggest taking a moment to watch our tutorial video. It’s designed to help you have a smooth and successful installation experience. We believe you’ll find it very helpful! Please go to https:/(www.rexingusq.com/ihwkinstqll or scan QR code

 Vibration Detection
To enable the Parking Monitor, you’ll need to connect it with a Rexing Type-C Smart Hardwire Kit (Included).

This feature will allow the dash com to switch to parking mode automatically if the vehicle’s engine turns off and switch bock to the normal recording ofter the vehicle’s engine turns on

Gravity Sensing Record:
The Gravity Sensing detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting the “Gravity Sensing” to High sensitivity for Parking Mode Recording.
Note:
If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and the video cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally.Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction.

 Motion Detection
To use this feature, you need to connect it with a Rexing 360° Intelligent Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off on your dash cam. Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction.  Once the sensor has detected MOTIONS. The intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared.

Wi-Fi Connect

Step 1
With your dosh com powered on, top the ■ icon to enter the settings menu. Then top Setup to novigote to the Wi-Fi function. The Wi-Fi name {SSID) and password for the dash com will be displayed on the screen.

Step2
On your mobile device, navigate to your Wi-Fi settings. Connect to your dash cam’s Wi-Fi by topping its name when it appears. Enter your dash cam’s Wi-Fi password if you ore prompted to do so. Nole: On some mobile devices, you may hove to try to connect more than once. To ensure you’ve successfully connected, your mobile device’s screen should resemble the examples shown.

Step 3

Once you’re connected to the dash cam, open the Rexing Connect opp on your mobile device. Please select “Keep Trying Wi-Fi” if you see the notification on the right.

Step4
In the opp, hit the “Connect” button to connect to your dash cam, allowing you to access live view and view/download your recordings. Note: Tap the “WiFi Connected, Press to Exit”button to disconnect the Wi-Fi.

Rexlng Connect App
Easily download the opp by scanning the QR code below or search via the App Stare or Google Play.

Wi-Fi Connect Troubleshooting
If you bring up the Rexing connect opp and cannot connect your phone to the dash cam please go to https://www.rexingusa.com/wifi-connect/ OR scan the QR code below.

GPS Logger
The dash cam will automatically search for the GPS signal once it’s connected to the power source. You can then access this information while playing back your recordings using the GPS Video player.

For Windows and Mac, available at http://www.rexingusa.com/support/rexing-apps/. Press the MENU button twice and enter the System Settings. Toggle to the GPS Speed Unit setting and select your preferred speed unit. Alter a GPS signal is found, the screen icon will turn from white to green. Please visit gpsa.rexingusa.com to watch a video tutorial.

GPS Date-Time Troubleshooting
If your dash cam GPS date and time are incorrect please go to
https://www.rexingusa.com/gps-date-time/ OR scan the QR code below.

Warranty & Support

Warranty

• The Rexing R88 Dosh Com comes with a limited 12-month warranty. If you register your product on our official site
  (https://www.rexinguso.com/support/registrotion), you con extend the limited warranty to 18 months.
• Support
• If you hove any questions regarding your product, please do not hesitate to contact us at core@rexinguso.com, or coll us at (877) 7 40-8004. Queries ore typically answered within 12-24 hours.
• Your opinion matters
• Rexing is firmly committed to always improving our products, services,
  and user experience. If you hove any thoughts on how we con do even better, we welcome your constructive feedback and suggestions.
• Connect with us today at core@rexinguso.com
• Thank you for choosing Rexlngl

FCCID

2AW5W-R88
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Documents / Resources

REXING R88 Dash Camera [pdf] User Manual R88, R88 Dash Camera, Dash Camera, Camera

References

• User Manual