resistex Resiclic LED Modules Installation Guide

resistex-LOGO

resistex Resiclic LED Modules

resistex-Resiclic-LED-Modules-PRODUCT

Product Information

Specifications

  • Brand: RESISTEX
  • Model: APE 2740Z
  • Siret: 487 593 477 00010
  • Version: V1.1 – 05.24
  • Color Temperature Options: Warm White (WW), Neutral White (NW), Cool White (CW)
  • Color Temperature Variants: 4000K, 3500K, 3000K

Product Usage Instructions

Safety Notes

  • Never works when voltage is present on the luminaire.
  • The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
  • Risk of electrostatic discharges (ESD Norm). Handle with precautions.
  • Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

  • Do not use chemicals or abrasives products to clean the fixture.
  • Keep these instructions for dismantling or future maintenance.
  • You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com. RESISTEX cannot be responsible for any misuse of the product.

Montage/Installation Steps

  1. Choose the desired color temperature option (WW, NW, CW) and variant (4000K, 3500K, 3000K).
  2. Connect the appropriate wires (N, L) following the installation instructions.

FAQ

Q: Can I clean the fixture with chemicals?

A: No, do not use chemicals or abrasive products to clean the fixture as per maintenance instructions.

Q: What should I do if there is voltage present on the luminaire during work?

A: Never work when voltage is present on the luminaire. Ensure safety by disconnecting the power before proceeding.

Q: Who should install the product?

A: The installation must be performed by a professional installer in compliance with electrical installation standards and regulations.

Safety notes

  • Never works when voltage is present on the luminaire.
  • The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations
  • Risk of electrostatic discharges. (ESD Norm).
  • Handle with precautions.
  • Please observe the notes and steps described in the mounting instructions.

Maintenance instructions

  • Do not use chemicals or abrasives products to clean the fixture.
  • Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
  • RESISTEX cannot be responsible for any misuse of the product.

Installation Instructions

resistex-Resiclic-LED-Modules-FIG-1

  • www.resistex-sa.com
  • RESISTEX EXPLOITATION, 11 Tél. 04 93 276 276 – Fax 04 93 276 280 – contact@resistex-sa.com
  • APE 2740Z – Siret 487 593 477 00010 – SAS CAPITAL 649979 € – T.V.A. F.R. 73 487 593 477

Documents / Resources

PDF thumbnailResiclic LED Modules
Installation Guide · Resiclic, Resiclic LED Modules, LED Modules, Modules

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.