MODULOLED Ceiling Light
Specifications
- Product Name: MODULOLED
- Model Number: APE 2740Z
- Siret: 487 593 477 00010
- Installation Version: V1- 05.25
- Website: www.resistex-sa.com
Product Usage Instructions
Safety Notes
– Never work when voltage is present on the luminaire.
– The installation must be performed by a professional installer
in compliance with the standards and regulations relating to
electrical installations.
– Risk of electrostatic discharges (ESD Norm). Handle with
precautions.
– Please observe the notes and steps described in the mounting
instructions.
Maintenance Instructions
– Do not use chemicals or abrasives products to clean the
fixture.
– Keep these instructions for dismantling or future
maintenance.
– Consult additional information about RESISTEX luminaires on
the website www.resistex-sa.com. RESISTEX
cannot be responsible for any misuse of the product.
MONTAGE / INSTALLATION A
Parts Included:
- PH2 X1
- PH2 X2
- A1
- B1 208
Wiring Instructions:
- Connect LN to A1.
- Connect HO5RN-F U-1000 R2V to B1 208.
Note: If using the HF version, follow additional
instructions provided.
FAQ
Q: Can I clean the fixture with chemicals?
A: No, do not use chemicals or abrasives products to clean the
fixture as it may damage the product.
Q: Who should perform the installation?
A: The installation must be performed by a professional
installer in compliance with the standards and regulations relating
to electrical installations for safety reasons.
Q: Where can I find additional information about RESISTEX
luminaires?
A: You can visit the website www.resistex-sa.com for additional
information about RESISTEX luminaires.
MONTAGE / INSTALLATION
V1- 05.25
www.resistex-sa.com
RESISTEX EXPLOITATION, 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche France Tél. 04 93 276 276 – Fax 04 93 276 280 – contact@resistex-sa.com
APE 2740Z – Siret 487 593 477 00010 – SAS CAPITAL 649979 – T.V.A. F.R. 73 487 593 477
MODULOLED
FR Notice d’installation
Consignes de sécurité
-Ne travaillez jamais sur le luminaire lorsque celui-ci est sous tension. -L’installation doit être réalisée par un installateur professionnel dans le respect des normes et des réglementations portant sur les installations électriques. -Risque de décharges électrostatiques. (Norme ESD). Manipuler en prenant les précautions nécessaires. -Veuillez respecter les indications et les étapes de montage.
Entretien
-Ne pas utiliser de produits chimiques ou abrasifs pour nettoyer le luminaire. -Veuillez conserver ce manuel d’installation pour la dépose ou pour les travaux de maintenance ultérieurs. Vous pouvez consulter des informations complémentaires concernant les luminaires RESISTEX sur le site internet www.Resistex-sa.com . RESISTEX ne saurait être tenu pour responsable de toute mauvaise utilisation du produit.
00
EN Installation Instructions
Safety notes
-Never work when voltage is present on the luminaire. -The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations -Risk of electrostatic discharges. (ESD Norm). Handle with precautions. -Please observe the notes and steps described in the mounting instructions.
Maintenance instructions
-Do not use chemicals or abrasives products to clean the fixture. -Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com . RESISTEX cannot be responsible for any misuse of the product.
Applique & Plafonnier
40
MONTAGE / INSTALLATION A
1
PH2 X1
B1 208
PH2 X2
A1
2
LN
HO5RN-F U-1000 R2V
B
1
2
HF version
Documents / Resources
 | MODULOLED Ceiling Light |
References
- mailto:contact@resistex-sa.comresistex-sa.com
- sa.comsa.com
- Résistex - Solutions d'éclairage professionnelwww.resistex-sa.com
- Résistex - Solutions d'éclairage professionnelwww.resistex-sa.com
- User Manualmanual.tools