G2602DB Gigabit Ethernet Switch
Product Information
Specifications:
- Number of Ports: 24*10/100/1000M RJ45 ports
- Uplink Ports: 2 SFP uplink ports
- Port Features: MDI/MDIX automatic flip, duplex/rate
self-negotiation - Flow Control: IEEE 802.3x full duplex and backpressure half
duplex
Product Usage Instructions
Installation
- Choose a suitable location for the switch, ensuring proper
ventilation. - Connect the power adapter to the switch and plug it into a
power source. - Connect devices to the RJ45 ports using Ethernet cables.
- For high-speed uplink, connect compatible devices to the SFP
uplink ports.
Configuration
Access the switch’s management interface through a web browser
by entering the default IP address in the address bar. Use the
provided credentials to log in and configure settings such as
VLANs, QoS, and security features.
Maintenance
Regularly check and update firmware to ensure optimal
performance. Inspect physical connections for any issues and
replace faulty cables promptly. Keep the switch clean and free from
dust.
Frequently Asked Questions (FAQ)
Q: How can I reset the switch to factory defaults?
A: Locate the reset button on the switch, press and hold it for
10 seconds until the LEDs flash. The switch will then reboot with
factory settings.
Q: Can I connect non-Gigabit devices to the switch?
A: Yes, the switch is backward compatible, allowing you to
connect devices with lower speeds to the Gigabit ports.
Q: What is the default login credentials for the management
interface?
A: The default username is usually “admin” and the default
password is “admin” or may be found in the user manual.
01 Product introduction
Product overview
All gigabit ethernet switch with simple and convenient installation and maintenance means and rich business characteristics, which helps users to create security high performance network. The product can be widely used in the field of data exchange such as home network, multimedia classroom, security monitoring, wireless network and so on.
Port performance
Provide 24*10/100/1000M RJ45 ports which can realize line speed forwarding. Provide 2 SFP uplink ports for high-speed uplink transmission. Each port supports MDI/MDIX automatic flip and duplex / rate self negotiation. Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
Fiber Fiber convergence
converter
switch
Computer
Camera Wireless AP
IP Phone
Game player Intelligent door lock
Documents / Resources
 |
REPOTEC G2602DB Gigabit Ethernet Switch [pdf] Instruction Manual G2602DB, G2602DB Gigabit Ethernet Switch, G2602DB, Gigabit Ethernet Switch, Ethernet Switch, Switch |