RENU AP6-CN Android Panel
INTRODUCTION
AP6070CN and AP6101CN android panels are suitable for simple applications. Available screen sizes are 7” and 10.1” with Color TFT Sunlight-readable display. All the products are compliant to EMC directive 2014/30/EU and LVD directive 2014/35/EU .
SPECIFICATIONS
| AP6070CN | AP6101CN | |
| Size | 7″ | 10.1″ |
| Dimensions(In mm) | 186.00(W)×138.
00(H)×30.5(D) |
268.00(W)×190.00
(H)×32.0(D) |
| Display | 1024 x 600 pixels, XGA Colour TFT,
Capacitive touch display |
|
| Power | 11V to 28V,
7W |
11V to 28V,
10W |
| Colors | 16.7M | |
| Memory | eMMC: 8GB
RAM: 1GB |
|
| CPU | Cortex-A53 quad-core | |
| USB Ports | 1x Type A USB 2.0 OTG port female ,
1x Type A USB 2.0 port female |
|
| Ethernet | 1×10/100Mbps (RJ45) | |
| Bluetooth | Built-in, v2.1+EDR/BT v3.0/BT
v3.0+HS/BT v4.2 |
|
| Camera IN | Supports USB camera (2 MP) | |
| SD Card Slot | 1 x microSDHC | |
| Audio/Mic | 3.5mm CTIA standard jack | |
| Wi-Fi | Built-in, supports IEEE 802.11
b/g/n/ac |
|
| Weight | Approx. 0.8kg | Approx.1kg |
| Environment & Approvals | ||
| Operating
Temperature |
-20°C to 60°C | |
| Storage Temperature | -30°C to 85°C | |
| Humidity | 10 to 90%RH (Noncondensing) | |
| Shock | IEC 60068-2-27
25g, 11ms, 6 shocks per axis, total 18 shocks (X, Y, Z) |
|
| Vibration Immunity | 5~150Hz, 1g peak, (X, Y, Z) | |
| Protection | Front panel-IP66, Rare panel-IP20 | |
| Approvals | CE, RoHS,UKCA, REACH | |
Default Product Settings
| Network Settings | DHCP |
| Brightness | 1000 nits |
| Default Language | English |
PRODUCT DIMENSIONS
AP6070CN
AP6101CN
PANEL CUTOUT DIMENSIONS
- Panel Cutout Dimensions:
- A P6070CN:178.00 (W) x 130.00(H)mm
- A P6070CN:258.20.00 (W) x 180.20(H)mm
- Mounting Clamps: 2
Tighten the mounting screws evenly to a torque between 0.4N/m to maintain water and dust resistance.
COMMUNICATION
This section provides information regarding communication interfaces supported by this product.
RJ45/Ethernet Port AP6 series supports Ethernet 10/100 Mbps port as an ordering option. It’s having a standard shielded RJ45 female jack with built-in speed and indication LED’S.
| Pin
number |
Signal |
| 1 | TX+ |
| 2 | TX- |
| 3 | RX+ |
| 4 | NC |
| 5 | NC |
| 6 | RX- |
| 7 | NC |
| 8 | NC |
- Type A USB Port
- The AP6 comes with 2 Type A USB ports, female.
- Wi-Fi ConnectionThe
- Android panel AP6 series supports Wi-Fi connectivity with the 2.4GHz frequency band. To connect Wi-Fi, open the Settings app from the home screen
- Wi-Fi Antenna
- Android panel AP6 comes with an Antenna having a frequency range of 2.4GHz. 3 meters of optional extension cable.
Installation of Applications
Using a pen drive
- Copy the .apk file of the application to be installed.
- Enable OTG host in settings, then connect the pen drive in the USB port.
- Browse and open the location of the .apk file in the pen drive.
- Click on the .apk file of the application, and then click on ‘INSTALL’ in the pop-up window. This will start the installation.
- Once the app is installed, it will show the ‘App installed’ pop-up. Then click on DONE or OPEN.
Using internet
- Connect the internet to an Android device using Wi-Fi or Ethernet.
- Open an internet browser and download the .apk file of the required application.
- After downloading is complete, the browser .apk file is in the Amaze file manager app.
- Click on the .apk file of the application, and then click on ‘INSTALL’ in the pop-up window. This will start the installation.
- Once the app is installed, it will show the ‘App installed’ pop-up. Then click on DONE or OPEN.
Power Supply
- 24V DC Power supply is there. The metal body is connected to the processor circuit ground. Do not connect the earth.
WARNING: There is no lock screen facility available on the device. DO NOT go to Settings à Security à Screen Lock à Selected Swipe to enable lock screen. This will render the device unusable and non-recoverable.
Navigation Bar Settings
Navigation Buttons
- Volume: Decrease the system volume.
- Back: Return to the previous page.
- Home: Return to the home screen.
- Recent: Switch between recently used apps.
- Volume +: Increase the system volume.
Wi Fi and Ethernet Settings:
Wi-Fi:
- Click on – Settings> Network & Internet
- Enable Wi-Fi, it will scan and show available networks.
- Click on the shown Wi-Fi network, enter the password (if the network is protected) then press OK.
Ethernet :
- Click on – Settings> Network & Internet > Ethernet on the Android Panel
- Check MAC address, IP address, Gateway, DNS given ‘NETWORK INFO’
- To Set Up IP address and Port Number, go through Settings on the Android Panel
REVISION HISTORY
| Rev. | Description | Date |
| 1.0.4 | Specification updated | 09/06/2025 |
| 1.0.3 | Power updated | 28/08/2024 |
| 1.0.2 | Second Draft | 25/07/2024 |
| 1.0.1 | First Draft | 09/07/2024 |
RENU Electronics Pvt. Ltd® reserves the right to change or discontinue specifications and features without prior notice. To view the latest and updated datasheets/manuals, please visit www.renuelectronics.com.
FAQs
Q: Can I use an external USB camera with this device?
A: Yes, the device supports a USB camera with up to 2MP.
Q: What is the default language setting for the product?
A: The default language is English.
Q: How can I connect to Wi-Fi on this device?
A: To connect to Wi-Fi, open the Settings app from the home screen and navigate to the Wi-Fi settings to establish a connection
Documents / Resources
 |
RENU AP6-CN Android Panel [pdf] User Guide AP6070CN, AP6101CN, AP6-CN Android Panel, AP6-CN, Android Panel, Panel |