RENESAS FPB-RA0E1 Fast Prototyping Board
Introduction
The FPB-RA0E1 Fast Prototyping Board provides an entry point for evaluation, prototyping and development with the RA0E1 MCU. Moreover, since this board incorporates an emulator circuit, you can use it for designing your own applications without the need to make further investments in tools. This product includes through-holes for pin headers that allow access to all MCU signal pins, allowing easy prototyping with the use of a breadboard.
Package Contents
- FPB-RA0E1 Fast Prototyping Board (RTK7FPA0E1S00001BJ)
- Quick Start Guide (this document)
- USB cable (type-A male to type-C male)
- Information on China RoHS
Board Specifications
| Item | Specification |
| Evaluation MCU | Part No: R7FA0E1073CFJ; package: 32-pin LQFP |
| On-chip memory: 64-KB ROM, 12-KB SRAM, 1-KB data flash memory | |
| Board size | Size: 53 mm × 85 mm; thickness: 11.5 mm |
| Power-supply voltage | Board supply: 5 V, VCC: 3.3 V, MCU operating-voltage range: 1.6 V to 5.5 V |
| Power-supply circuit | USB connector: VBUS (5-V input); VBUS is converted to 3.3 V by LDO |
| 2-pin external power-supply header*1 | |
| Push switches | Reset switch x 1; user switch x 1 |
| LEDs | Power indicator: green x 1, user: green x 2, on-board debugger ACT LED: yellow x 1 |
| USB connector | Connector: USB Type-C |
| Pmod™ connectors | Connectors: angle type, 12 pins x 2 |
| Arduino™ connectors | Connectors: 6 pins x 1, 8 pins x 2, 10 pins x 1
The interfaces are compatible with Arduino™ UNO R3. |
| MCU headers*1 | Headers: 16 pins x 2 |
| Emulator | J-Link on-board programmer/debugger |
*1 This part is not mounted.
Board Layout
Arduino Interface
Pmod Interface
The FPB-RA0E1 Fast Prototyping Board has two Pmod connectors. Pmod1 supports Type 2A or 3A and can also be configured for Type 6A interfaces. Pmod2 supports Type 6A and can also be configured for Type 2A or 3A.
Note on Using the Board
Before using this board, download the user’s manual from the website at renesas.com/ra/fpb-ra0e1 and check the full specifications.
Tutorial for Blinky:
RA Flexible Software Package Documentation: Starting Development (renesas.github.io)
Documents / Resources
 |
RENESAS FPB-RA0E1 Fast Prototyping Board [pdf] User Guide FPB-RA0E1, FPB-RA0E1 Fast Prototyping Board, FPB-RA0E1, Fast Prototyping Board, Prototyping Board, Board |