Remote Tech RT-TQ84F35 Electronic Key
Specifications
- FCC ID: 2AOKM-HK38
- IC: 24223-HK338
- Model: RT-TQ84F35
Product Usage Instructions
This remote has lock, unlock, Liftgate Unlock Hold Button , Forward button and Backward button, remote start Button and panic hold buttons; you can lock and unlock the vehicle doors and trunk/hatch with the remote transmitter.
- LOCK Button:
When you press the LOCK button, it locks all the doors. - UNLOCK Button:
Pressing the button unlocks the driver’s door. Pressing the button again within 5 seconds unlocks the other doors. - Liftgate Unlock Hold Button:
Press and Hold. Will open if equipped with power liftgate - PANIC HOLD Button:
When you press the PANIC button, the vehicle will start sounding the horn and flushing the hazard lamp. To stop the alarm, press any button on the electronic key. - Forward button and Backward button:
When using the Remote Forward/ Backward function, the vehicle moves in the direction of the button while the button is pressed. - REMOTE START Button:
Press the remote start button twice within 5 seconds. The vehicle will stay in the Remote Start mode for a 15-minute cycle. Press and release remote start button once to exit Remote Start mode.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
FAQ
Q: How do I program the remote transmitter?
A: Please refer to the user manual for detailed instructions on programming the remote transmitter for your specific vehicle model.
Q: What should I do if the remote key fob is not working?
A: If the remote key fob is not working, try replacing the battery. If the issue persists, contact customer support for further assistance.
Documents / Resources
 |
Remote Tech RT-TQ84F35 Electronic Key [pdf] User Manual 2AOKM-HK38, RT-TQ84F35 Electronic Key, RT-TQ84F35, Electronic Key, Key |