049-023 Rematch Advanced Wired Controller User Guide

049-023 Rematch Advanced Wired Controller - front page

PACKAGE CONTENTS

■ Rematch ™ Advanced Wired Controller
■ 8ft/2.4m USB-C Cable
■ Quick-Start Guide

SETUP

  1. Initial Setup
    Plug the USB-C end of the cable into the top of the controller, and the USB-A side into your console or PC, then press the Xbox button on the controller. The light above the Xbox logo will illuminate to indicate it is connected.
    049-023 Rematch Advanced Wired Controller - Initial Setup
  2. Mute Microphone
    Press the function button, located above the audio jack, twice to mute your microphone.
    049-023 Rematch Advanced Wired Controller - Mute Microphone
  3. Control Volume
    While holding down the function button, press D-Pad +Up/-Down to adjust game volume.
    049-023 Rematch Advanced Wired Controller - Control Volume
  4. Game/Chat Balance
    While holding down the function button, press D-Pad Left/Right to adjust game/chat balance.
    049-023 Rematch Advanced Wired Controller - Game or Chat Balance
  5. Program Back Buttons
    ■ While holding down the function button, press the back button you would like to map a function to, and the function button LED will start flashing.
    ■ Press any button you would like mapped, and the function button LED will flash 3 times indicating a successfully mapped function.
    049-023 Rematch Advanced Wired Controller - Program Back Buttons
  6. Hair Trigger Mode
    Hair triggers are a highly-sought after feature that allows for faster triggers pulls, and an enhanced gaming experience. Turtle Beach uses Hall-effect true digital hair triggers for a rapid and precise trigger response.
    049-023 Rematch Advanced Wired Controller - Hair Trigger Mode
    To enable hair trigger mode:
    ■ Toggle the slider buttons on the back of the controller upward to set the trigger buttons to hair-trigger mode.
    ■ Toggle the slider buttons on the back of the controller downward to set the trigger buttons back to full-distance mode.
  7. Control Hub App
    To customize your controller further, download the free Control Hub App from the Windows Store on your PC or Xbox. You can use it to re-map buttons, run diagnostics, recalibrate analog sticks and triggers, and much more.
    Open the Microsoft Store from your PC or Xbox console, search and download “Turtle Beach- PDP Control Hub”.
    Or, if you are on PC, download the App from this link:
    https://apps.microsoft.com/detail/9p3l4zvw8vdf?hl=en-US&gl=USon
    049-023 Rematch Advanced Wired Controller - Control Hub App

049-023 Rematch Advanced Wired Controller - Turtle Beacj logo

Any questions?
www.turtlebeach.com/support

Please register your product to receive important updates.
www.turtlebeach.com/productregistration

For warranty, visit:
www.turtlebeach.com/warranty

Documents / Resources

REMATCH 049-023 Rematch Advanced Wired Controller [pdf] User Guide
049-023 Rematch Advanced Wired Controller, 049-023, Rematch Advanced Wired Controller, Advanced Wired Controller, Wired Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *