Relita RENE Functional Bed

Product Information

Specifications:

• Product Name: RENE Funktionsbett
• Model Number: EB48541150
• Manufacturer Contact: +49-511-271900, reklas@relita.com
• Address: Bayernstr. 13
• Material: Plywood
• Finish: Natural Lacquer

The bed should be put together by 2 people.

Important! Please carefully read the instruction manual with the warning and safety instructions before assembling the bed and keep them for future use. The owner’s manual also includes assembly instructions with a parts list and the tools required for safe assembly of your bed It is important to ensure all components and the tools required to beavailable and complete.

Safety instructions

Warning and safety instructions: Please ensure to generally observe the manufacturers assembly instructions. In detail, these are:

1. When assembling the bed make sure that the connecting elements are tightened correctly. The connecting elements must also be monitored for tightness during use
2. The bed may not be used if any component is missing or broken
3. The following items may not be attached to or hung on the bed ropes, string, cords, straps, belts, etc… Danger of strangulation !!
4. Please note that the room is to be aerated thoroughly to keep the air humidity low and prevent the formation of mould inside and around the bed.

Care instructions

The bed should be cleaned only with a damp cloth

• ID. identifier, Multifunction bed RENE
• Plywood

Assembly instructions

Assembly instructions Multifunction bed RENE

PARTS LIST

List of Materials

N o	QTY.	Dimensions  / mm	Box *
1	1	1131 x 900 x 25	1 / 4
1.1	1	1131 x 900 x 25	1 / 4
2	1	2006 x 348 x 16+(25)	2 / 4
3	1	2000 x 366 x 18+(25)	2 / 4
4	1	2002 x 233 x 16	3 / 4
5	2	884 x 233 x 16	3 / 4
5.1	1	884 x 233 x 16	3 / 4
6	1	884 x 100 x 16	3 / 4
7	2	812 x 150 x 16	3 / 4
8	2	500 x 150 x 16	3 / 4
8.1	2	500 x 150 x 16	3 / 4
9	2	865 x 200 x 16	2 / 4

N o	QTY .	Dimensions  / mm	Box *
10	2	827 x 500 x 3.2	1 / 4
11	13	900 x 67 x 15	4 / 4
12	12	900 x 67 x 15	4 / 4
13	1	2006 x 20 x 30	2 / 4
14	1	91 x 48 x 20	4 / 4
15	2	2006 x 169 x 16	2 / 4
16	2	264 x 146 x 16	3 / 4
17	1	2020 x 282 x 3.2	2 / 4
18	1	1995 x 35 x 25	2 / 4
19	1	865 x 35 x 25	2 / 4
20	1	935 x 35 x 25	2 / 4
21	2	60 x 35 x 25	2 / 4

Distribution of parts by box

INSTALLATION INSTRUCTION

Positioning and securing of the bed side slats

1. Put the back panel of the bed on ground facing backside and make sure that there is nothing bellow the panel
2. Put the front panel of the bed on ground facing frontside and make make sure that there is nothing bellow the panel
3. Make sure that front panel of the bed and back side panel of the bed are clean from dust,dirt and oil.
4. Make sure that all panels that you need to apply glue to are clean from dust,dirt and oil and then apply glue on them.
5. Make sure that you apply the glue from right side and wait 5min. for glue to cure.
6. Gently turn over all panels that you apply glue on and place them on right possition.
7. Gently apply presure on the surface of the panels and secure them with screws.
   IMPORTANT:
   Full cure time of the glue is 12 hours!

FAQ

Can I assemble the bed alone?

It is recommended to assemble the bed with the help of another person to ensure safe and proper assembly.

How should I clean the bed?

Use a damp cloth for cleaning. Avoid using harsh chemicals or abrasive materials.

What should I do if a component is missing or damaged?

Do not use the bed and contact the manufacturer immediately for replacement parts.

Documents / Resources

Relita RENE Functional Bed [pdf] Installation Guide EB48541150, RENE Functional Bed, RENE, Functional Bed, Bed

References

• User Manual