Rebec-logo

Rebec RPX-B680 Digital Signal Processing Amplifier

Rebec-RPX-B680-Digital-Signal-Processing-Amplifier-product

Overview

The RPX-B680 and RPX-B480 are digital signal processing audio power amplifiers designed for car audio systems.

Specifications

Specification RPX-B680 RPX-B480
Dimensions 170mm x 120mm x 43mm 170mm x 120mm x 43mm
Output Power (MAX) 65W x 4ch + 50W x 2ch 65W x 4ch
Frequency Response 20Hz~20KHz 20Hz~20KHz
DSP Frequency Sampling 192KHz 192KHz
Signal to Noise Ratio 105dB 105dB
Total Harmonic Distortion <0.01% (low level output), <0.03% (high level output) <0.01% (low level output), <0.03% (high level output)
Bluetooth Version Bluetooth 5.0 Bluetooth 5.0
Operating Voltage 10-16 Volts 10-16 Volts
RCA Output Voltage 2.35 Volts 2.35 Volts

Rebec-RPX-B680-Digital-Signal-Processing-Amplifier- (1)

Dimensions & Terminals

  1. Low Level Output
  2. Low Level Input
  3. Activate Selection Button: ACC or HOST
  4. Computer Connection Port
  5. USB Playback Port
  6. Optical Input
  7. Coaxial Input
  8. Control Panel Connection Port
  9. High Level Output
  10. Dedicated Docking Port

Rebec-RPX-B680-Digital-Signal-Processing-Amplifier- (2)

Bluetooth Connection Tutorial

When the amplifier is in working mode, the phone can search for the device name “CAR_DSP_C5.2” through Bluetooth function, and click this option to perform Bluetooth pairing.

INSTALLATION TIP

  • It is forbidden to dismantle and change the product by oneself. disassembly and modification of the product may cause accidents, fire or electric shock.
  • This product is recommended for use in automotive environments with a DC voltage range of 12-14.4 v beyond which failure may occur.
  • Before wiring, be sure to disconnect the cable from the Power Terminal First, other-wise it is easy to cause short circuit and cause fire.
  • Do not use the screws and nuts in the brake system when installing and grounding cables. This will cause the brake system to fail and cause an accident.
  • Protect the cable from damage caused by pulling, cutting and short-circuiting.

Connection Indicator Diagram

The diagram shows connections for car host, speakers, active subwoofer, additional source, and laptop, indicating the input and output ports on the amplifier.

Rebec-RPX-B680-Digital-Signal-Processing-Amplifier- (3)Rebec-RPX-B680-Digital-Signal-Processing-Amplifier- (7) Rebec-RPX-B680-Digital-Signal-Processing-Amplifier- (8)

FAQ

How do I connect my phone via Bluetooth?

Search for the device name CAR_DSP_C5.2 through Bluetooth and select it to pair.

What is the operating voltage range?

The amplifier operates between 10-16 Volts.

Documents / Resources

Rebec RPX-B680 Digital Signal Processing Amplifier [pdf] Owner's Manual
RPX-B480, RPX-B680 Digital Signal Processing Amplifier, RPX-B680, Digital Signal Processing Amplifier, Signal Processing Amplifier, Processing Amplifier, Amplifier

References

Leave a comment

Your email address will not be published. Required fields are marked *