RC-Factory Edge 540 V3 Kit
RC-Factory Edge 540 V3 Kit – 1000mm
Specifications:
- Wing span: 1000 mm
- Length: 1020 mm
- Weight: Approximately 500g depending on the equipment used
- Motor: 2212 – 2217, 150 – 200W
- Servos: 4x 9 – 12g
- Receiver: Micro, mini
- ESC: 18A / 2A min.
- Battery pack: 3s 1000 – 1500 mAh
Product Information:
The RC-Factory Edge 540 V3 Kit with a 1000mm wingspan is part of
a new line of EPP models designed for increased stiffness and
torsion rigidity. The fuselage has been reinforced for improved
torsion rigidity, eliminating fuselage twist during fast rolling
maneuvers. The thicker wing enhances tolerance for high-G stunts,
making it ideal for aerobatic flying.
This model is capable of accommodating larger motors up to size
2217, although it performs well with 2212 motors. It is recommended
for users seeking powerful performance in their 3D models.
Product Usage Instructions:
Assembly:
- Refer to the provided manual for detailed assembly
instructions. - Ensure all components are securely attached and aligned
properly. - Check control surfaces for proper movement and adjust as
needed.
Flight Preparation:
- Charge the battery pack to the recommended capacity.
- Perform a pre-flight check of all control surfaces, motor, and
electronics. - Select an appropriate flying location with ample space for
maneuvers.
Flight:
- Start by flying at lower throttle settings to familiarize
yourself with the model’s handling. - Gradually increase throttle for aerobatic maneuvers such as
loops and rolls. - Practice different flight patterns to explore the model’s
capabilities.
FAQ:
Q: Can I use a larger motor than the recommended sizes?
A: While the model can accommodate motors up to size 2217, it is
essential to ensure compatibility with the ESC and battery pack for
optimal performance and safety.
Q: What battery pack capacity is recommended for extended
flight times?
A: A 3s battery pack with a capacity between 1000 – 1500 mAh is
suitable for achieving extended flight times while maintaining a
balanced power-to-weight ratio.
RC-Factory Edge 540 V3 Kit – 1000mm
Art.Nr.: T101
This is a first model of a new line of 1m wingspan EPP models with increased stiffness and torsion rigidity. We have beefed up everything, but especially the torsion rigidity of the fuselage – so that fuselage twist in fast rolling maneuvers is now totally a thing of the past. The wing is thicker too, for better tolerance of the most insane, high-G stunts.
This model can also take a bigger motor up to the 2217 size, although it already flies nicely with 2212 motors. If you prefer insane power in your 3D models, this one is the ticket.
Outdoor Series:
If you prefer bigger models with fully airfoiled wing, you can´t make a mistake with these. Developed by some of the best 3D pilots for a combination of 3D capability and easy, predictable handling.
Hauptmerkmale
Wing span: 1000 mm Length: 1020 mm Weight: ca 500g depending on the equipment used Motor: 2212 – 2217, 150 – 200W Servos: 4x 9 – 12g Receiver: micro, mini ESC: 18A / 2A min. Battery pack: 3s 1000 – 1500 mAh
Die Handbcher EN: Edge 540 V3 1m manual
PREIS:
89,90 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Documents / Resources
 |
RC-Technik RC-Factory Edge 540 V3 Kit [pdf] Owner's Manual T101, RC-Factory Edge 540 V3 Kit, Edge 540 V3 Kit, 540 V3 Kit, V3 Kit, Kit |