WIRE BINDING MACHINE
TD-130
User Guide
https://youtu.be/n2F-Wn3pvZM
Wire Binding Machine
| *THE METRIC SYSTEM(mm) | *THE BRITISH SYSTEM(inch) | *BINDING CAPACITY(sheets 80g/20b1.) |
| 5. | 3/16 | 5-30 |
| 6. | 1/4 | 5-45 |
| 8 | 5/16 | 46-60 |
| 10. | 3/8 | 61-75 |
| 11 | 7/16 | 76-90 |
| 13. | 1/2 | 91-105 |
| 14. | 9/16 | 106-120 |
| 16 | 5/8 | 121-135 |
| Pitch | 3:01 | |
| Punching capacity | 12 sheets (201b/80q paper) or 2 sheets binding cover | |
| Binding ring size | From 1/4″ up to 9/16″ (6.4mm – 14.3mm) | |
| Max. punching size per time | A4 | |
| Binding system | Vertical | |
| Margin depth | 2.5, 3.5, 4.5 mm | |
| Hole type | Square (4×4 mm) | |
| Holes quantity | 34 | |
| Dimension of machine | 400x235x350 mm | |
| Weight of machine | 4.5kg | |
INSTRUCTION MANUAL
I: MACHINE CONSTRUCTION
II: BINDING RING DATA
IV: ASSEMBLE
V: The Dial for Punching or Wire Spine’s Diameter Size (White mark align you need)
VI: ATTENTION
- ≤ 12 Sheet 80g
> 12 Sheet 80
- a:Glass
b:Wet paper
c:Cloth
d:Metalb - Clean up wastepaper in time
- The machine must put on a stable working surface. Child is not allowed to operate.
VII: Operation Flow Chart
Please use oil removing paper (Enclosed ) to punch first in order to clean up the blades.
- Adjust the margin
- Adjust the paper stopper for punching different size of paper
- Turn the knob for selecting binding ring size.
(This is the most important) - Punching
- Place the 3: 1 Wire ring with paper
- Turn the ring selector to punching position
(White mark align the size you need) - Be ensured the wire ring be magnetic absorbed
- Binding
Documents / Resources
 |
RAYSON TD-130 G Wire Binding Machine [pdf] User Guide TD-130 G Wire Binding Machine, TD-130, G Wire Binding Machine, Binding Machine, Machine |
