Contents hide
1 Raychem T-100 Splice and Tee Connection Kit
2 INSTRUCTION
3 TOOLS NEEDED
4 ATEX and IECEx approved
5 For ambient temperatures >+40°C
6 INSTALLATION
7 Documents / Resources
7.1 References
8 Related Posts

Raychem-LOGO

Raychem T-100 Splice and Tee Connection KitRaychem-T-100-Splice-and-Tee-Connection-Kit-PRODUCT

INSTRUCTIONRaychem-T-100-Splice-and-Tee-Connection-Kit-FIG-1

TOOLS NEEDEDRaychem-T-100-Splice-and-Tee-Connection-Kit-FIG-2

WARNING:
To prevent electrical shock or fire, this product must be installed correctly. Water ingress must be avoided before and during the installation.

CAUTION:
Prolonged or repeated contact with the sealant in the core sealer may cause skin irritation. Wash hands thoroughly. Overheating or burning the sealant will produce fumes that may cause polymer fume fever. Avoid contamination of cigarettes or tobacco. Consult MSDS VEN 0058 for further information.

WARNING:
 The purchaser should make the manufacturer aware of any external effects or aggressive substances that the equipment may be exposed to.

ATEX and IECEx approved

Rated voltage: 480 Vac (when used with nVent RAYCHEM VPL4)
Ambient temperature: –55°C to +56°C

For ambient temperatures >+40°C

Use a power cable with continuous temperature resistance of minimum +90°C
Use a metallic power cable gland approved for use in hazardous areas (for example nVent RAYCHEM GL-38-M25-METAL).

For voltages >254Vac and nVent RAYCHEM BTV, QTVR, XTV, KTV or HTV heating cables:
Use a power cable with continuous temperature resistance of minimum +90°C.
Maximum pipe temperature:

 

 

Heater type

  

Tmax continuous

 Tmax intermittent 1000h cumulative Tmax power off
BTV 65°C 85°C –
QTVR 110°C 110°C –
XTV 121°C 250°C –
KTV 150°C 250°C –
HTV 205°C 260°C –
VPL See tables below – 260°C

VPL: Maximum pipe temperature depending on heating cable reference and voltage

Voltage (VAC) 120 208 230 240 254 277 385 400 480
5VPL1-CT 230
10VPL1-CT 205
15VPL1-CT 170
20VPL1-CT 150
5VPL2-CT 235 230 230 225 225
10VPL2-CT 220 210 205 200 195
15VPL2-CT 200 180 170 145 105
20VPL2-CT 150 150 150
5VPL4-CT 230 230 230
10VPL4-CT 215 215 205
15VPL4-CT 195 195 160
20VPL4-CT 150 150 150

INSTALLATIONRaychem-T-100-Splice-and-Tee-Connection-Kit-FIG-3 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-4 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-5 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-7 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-8 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-9 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-10 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-11 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-12 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-13 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-14 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-15 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-16 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-17 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-18 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-19 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-20 Raychem-T-100-Splice-and-Tee-Connection-Kit-FIG-21

Documents / Resources

Raychem T-100 Splice and Tee Connection Kit [pdf] Instruction Manual
T-100, Splice and Tee Connection Kit, T-100 Splice and Tee Connection Kit, Tee Connection Kit, Connection Kit

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *