RAVAS RWV-C Cabled Iforks
Product Usage Instructions
Installation
The RAVAS RWV-C cabled fork scale needs to be fixedly installed on a forklift truck. Ensure proper cabling between the forks and the indicator in the cabin. The power supply should be connected to the truck battery.
Functionality
The RAVAS RWV-C weighing forks can be used with indicators offering advanced functions such as dosing, mixing, piece counting, communication with special printers, or data transfer to a truck terminal.
Benefits
- Legal for trade version available
- Weight transfer to the truck terminal
- Data transfer to WMS or ERP systems
- Tested for 1,000,000 cycles at 125% of capacity
Compact Scale Fork Dimensions
Refer to the dimensions specified for different capacity options to ensure proper fit and function.
FAQ
What are some optional features available for the RAVAS RWV-C?
Optional features include thermal or matrix printer, legal for trade version (OIML III), cabling over rolls integrated in the mast, smaller display graduations, different fork lengths, converter for various voltage requirements, explosion-proof version for hazardous areas (ATEX certified), or special spreaders.
Product Information
RAVAS RWV-C, the cabled iForks for forklift trucks, requires a fixed installation on the forklift truck. Cabling is installed between the forks and the indicator in the cabin. The power supply is taken from the truck battery.
The RAVAS RWV-C weighing forks can be used in combination with indicators that carry a higher functionality, for dosing, mixing or piece counting, for communication with special printers or for data transfer to a truck terminal.
Benefits
- Also in legal for trade version
- Weight transfer to the truck terminal
- Data transfer to WMS or ERP systems
- Tested 1,000,000 cycles at 125% of capacity
FUNCTIONS
- Functions of 2100 Exi, 3200, 5200 or 6200 weight indicator
- Static overload protection 200%; according to ISO 2330
- See the indicator specification sheet
The RAVAS indicators have been developed exclusively for mobile applications. They are robust and resistant to shocks and vibrations. RAVAS indicators are compact and have a low power consumption. All indicators are dust and waterproof, according to norm IP65. RAVAS mobile scales can be used outdoors.
STANDARD SPECIFICATIONS
- Capacity 2.500, 3.000 or 5.000 kg*
- Graduation multirange: Q-max 2.500 kg and Q-max 3.000 kg:
- 0 – 1.000 kg: graduation 1 kg
- 1.000 – Q.max: graduation 2 kg
- Q-max 5.000 kg:
- 0 – 2.000 kg: graduation 2 kg
- 2.000 – Q.max: graduation 5 kg
- System tolerance 0.1% of the load lifted
- Overload protection 200%
- Protection class IP65 / NEMA 4
- Cabling via spiral cable
- Power supply from truck battery, via regulator
in combination with rotators: capacity reduction of 15%
DIMENSIONS
DIMENSIONS IN MM
Tolerance +/- 2 mm; according ISO 2328
- Capacity specified at load center point 500 mm
- Specify fork drop type upon order, tolerance dimension +/- 5 mm
OPTIONS
- Thermal or matrix printer
- Legal for trade version, OIML III
- Cabling over rolls, integrated in the mast
- Smaller display graduations
- Different fork lengths (by length > 1700 mm height +5 mm)
- Converter 80/48/36/24Vdc – 12Vdc
- Explosion-proof version for use in hazardous areas, zoneI; ATEX certified
- Stainless steel fork shoes
- 12 – 12V regulator for fixed power supply on IC trucks
- Wide claws for use in combination with longer forks, rotators, or special spreaders
Contact
- RAVAS Europe B.V.
- Veilingweg 17, 5301 KM Zaltbommel, The Netherlands
- +31 418 515220
- salesoffice@ravas.com
- www.ravas.com
The use of options may change related specifications. Changes reserved rev. 20241125
Documents / Resources
 |
RAVAS RWV-C Cabled Iforks [pdf] Owner's Manual 2100 Exi, 3200, 5200, 6200, RWV-C Cabled Iforks, RWV-C, Cabled Iforks, Iforks |