RAVAS iFORKS-32 Completely wireless fork scale
BENEFITS
- Installation within 5 minutes
- Completely wireless through bluetooth: no cabling
- Fork power supply by Li-ion compact battery packs
- Digital calibration
- Load warning for tip and side loading
- Easy to install in combination with fork positioners
- Efficient power management
- Tested 1,000,000 cycles at 125% of capacity
Top quality
Plug & weigh
FUNCTIONS
- Automatic and manual zero correction
- Gross/net weighing
- Totaling with sequence number
- ID-code entry (5 digits)
- Integrated level correction in the forks
- Internal clock for date and time
- On board: RS232 port connection for printer Bluetooth 4.0 for RAVAS Weight Sapp
- Optional: WiFi or Bluetooth module for data communication
- Tip loading error message with logging
- Sleep mode for the forks with automatic start up
- Overload protection 200% on mechanical construction; according ISO 2330
STANDARD SPECIFICATIONS
- Capacity: 2.500 kg; 3.000kg; 5.000 kg*; 8.000 kg **
- Graduation multirange:
Q-max 2.500 kg and Q-max 3.000 kg:
0 – 1.000 kg: graduation 1 kg 1.000 – Q.max: graduation 2 kg Q-max 5.000 kg:
0 – 2.000 kg: graduation 2 kg 2.000 – Q.max: graduation 5 kg - System tolerance: 0.1% of the load lifted
- Display: dual color (green / red), digit height 20mm, with backlight, 5 digits
- Signal transfer Bluetooth 4.0
- Controls 4 function keys, on/off key
- Protection class IP65
- Dimensions housing 60 x 77 x 182 mm (excl. bracket)
* in combination with rotators: capacity reduction of 40%
** iForks 8.000: for dimensions, options, etc. request a quote
POWER SUPPLY
- Each fork has its own rechargeable Li-ion 3.7V / 5.2Ah battery pack. Autonomy 75 hours continuous use, incl. charger station.
- Indicator powered by 4 AA-batteries. Autonomy ca. 50 hours continuous use with no further options. Power supply from truck battery optional.
- Sleep function with automatic start up for the fork transmitters, auto shut-off function for the indicator.
DIMENSIONS IN MM
| 2500 kg* | 3000 kg* | 5000 kg* | ||
| FEM2 | FEM3 | FEM3 | ||
A | Fork length | 1150 | 1150 | 1150 |
| B | Fork width | 135 | 155 | 175 |
C | Fork height | 58 | 58 | 76 |
| D | Thickness of the fork tip | 15 | 15 | 15 |
E | Height above carriage plate | 68 | 68 | 70 |
| F | Height carriage plate | 407 | 508 | 508 |
G | Distance between claws | 418 | 518 | 518 |
| H | Fork drop FEM A/B | 76/152 | 76/203 | 76/203 |
I | Distance backside till fork tip | 1230 | 1230 | 1245 |
| J | Palletstop | 80 | 80 | 95 |
K | Thickness base fork | 45 | 45 | 60 |
| L | Width of fork base | 100 | 120 | 140 |
M | Width of pallet stop | 143 | 163 | 183 |
| N | Height of pallet stop | 142 | 142 | 142 |
| Own weight per fork (kg | 65 | 79 | 119 |
Tolerance +/- 2 mm; according ISO 2328
* Maximum capacity specified at load center point 500 mm
Management System
ISO 9001 :2015
ISO 14001:2015
ISO 450011 :2018
www.tuv.com
ID 0000037200
OPTIONS*
- Legal for trade version, OIML III
- Different fork lengths (with length > 1700 mm height +5 mm)
- Capacity reduction with longer fork lengths
- Power regulator 12V-12V for IC-trucks
- Power convertor for electro trucks max. 100V-12V
- Thermal or matrix printer
- RDC, RAVAS Data Collector Software
- RIS, RAVAS Integration Software
- Bluetooth 2.0 or WiFi- data transfer
- Additional set of Li-ion battery packs
- Wide claws for use in combination with rotator or fork positioners
- Long-drop forks for special type of trucks
Customer Support
RAVAS Europe B.V.
Veilingweg 17, 5301 KM Zaltbommel, The Netherlands
T: +31 418 515220 E: salesoffice@ravas.com
WWW.RAVAS.COM
Documents / Resources
 | RAVAS iFORKS-32 Completely wireless fork scale [pdf] Instruction Manual iFORKS-32 Completely wireless fork scale, iFORKS-32, Completely wireless fork scale, wireless fork scale, fork scale, scale |
 | RAVAS iFORKS-32 Completely Wireless Fork Scale [pdf] Owner's Manual iFORKS-32 Completely Wireless Fork Scale, iFORKS-32, Completely Wireless Fork Scale, Wireless Fork Scale, Fork Scale, Scale |
