RAIN HARVESTING TATO60 Flanged Tank Overflow Kit Extra High Volume
PRODUCT DETAILS
An all-inclusive overflow solution for your tank to keep out pests and increase your tank’s capacity. The extra high bend on the inside of this overflow raises the overflow level of your tank, which instantly increases the volume of water you can store. It’s the quickest way to boost your storage capacity. The mosquito proof screen keeps pests at bay and protects your tank.
| Code | Size | Country |
| TATO60 | 90mm |
Australia |
| TATO23 | 100mm | |
| TATO123 | 4″ | USA |
| TATO23 | 100mm | New Zealand |
| TATO23 | 110mm | South Africa |
installation
WHAT’S IN THE BOX?
- Tank Overflow Extra High
- Mazzie Stoppa Original
- Rubber gasket
- 6 Stainless Steel screws
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Holesaw
- Drill
- Screwdriver
- Sealant
- Solvent Weld glue
TANK OVERFLOW KIT
- If you do not have an existing tank overflow hole in your tank, use your tank overflow outlet as a template to mark the size of the hole you need to cut in the side of your tank, then cut using a hole saw. Ensure that the bottom of the hole you cut sits lower than the bottom of the tank inlet and/or tank inlet screen.
- Ensure that the gasket is fitted firmly around the tank overflow fitting, then push it in place inside the tank overflow hole orientated so that the bend faces up.
- If you have an existing tank overflow hole and doing this means the open end of the bend will sit above the level of the tank inlet and/or tank inlet screen, orient the bend diagonally or trim the top of the overflow first.
- Hold the overflow outlet as you screw it in place, applying equal force to each screw. We recommend alternating between each screw, screwing on opposite sides, and avoiding fully tightening the screws until the end. Be sure not to overtighten the gasket.
- To install your Mazzie Stoppa Original, simply press into your tank overflow outlet. DO NOT GLUE IT IN PLACE.
Product Specifications
|
COUNTRY |
CODE |
A |
B |
C |
D |
E |
F |
Recommended Tank Hole Size |
|
Australia |
TATO60 | 90 F | 129 | 121 | 157 | 46 | 23 | 95 |
|
TATO23 |
100 F |
147 |
120 |
231 |
78 |
55 |
121 |
|
|
USA |
TATO123 |
4″ F |
5.79″ |
4.72″ |
9.09″ |
3.07″ |
2.17″ |
4.76″ |
|
New Zealand |
TATO23 |
100 F |
147 |
120 |
231 |
78 |
55 |
121 |
|
South Africa |
TATO23 |
110 F |
147 |
120 |
231 |
78 |
55 |
121 |
All dimensions are in mm unless otherwise stated.
Fitting guide:
- F = Female/ Socket Fitting
- M = Male/ Spigot Fitting (Pipe size)
- IP= In-Pipe Fitting
Maintenance
We recommend regularly cleaning your Mozzie Stoppa to prevent the mosquito-proof screen from becoming clogged or blocked with sediments and debris.
Mozzie Stoppa Original
To clean, remove your Mozzie Stoppa Original from your tank overflow outlet and hose or otherwise clean the mosquito-proof screen. Replace the Mozzie Stoppa Original immediately after cleaning by pressing it back into your tank overflow outlet.
A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help. With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
How can we help…You?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
Documents / Resources
 |
RAIN HARVESTING TATO60 Flanged Tank Overflow Kit Extra High Volume [pdf] Installation Guide TATO60 Flanged Tank Overflow Kit Extra High Volume, TATO60, Flanged Tank Overflow Kit Extra High Volume, Extra High Volume |
