RADIOMASTER Bandit Nano Module
Product Usage Instructions
Installation
- Ensure the device is powered off before installation.
- Locate the UART solder pads on the PCB for connecting to your device.
- Securely attach the Bandit Nano module to a compatible radio (Zorro, Pocket, or MT12).
- For optimal performance, use the included T-ANTENNA or consider the optional MOXON antenna for directional applications.
Powering On
To power on the Bandit Nano module, connect it to a power source within the voltage range of 6V to 16.8V using the USBC solder pads.
Usage
Once installed and powered on, you can use the Bandit Nano module as a receiver for your compatible radio system. The OLED display and LED indicator provide visual feedback on its operation.
Cooling System
The Bandit Nano features a heat sink for cooling. Ensure proper ventilation around the module for efficient heat dissipation.
Product Identification
Description
- Featuring maximum 200Hz packet rates and an innovative convection cooling system, the Bandit Nano 900MHz ELRS Module represents the cutting edge in ELRS technology. Attach the Nano module to a compatible radio (Zorro, Pocket or MT12) to enjoy all that ELRS has to offer.
- The included T-shape antenna is designed for general-purpose flying. An optional MOXON antenna is available separately for directional applications.
- Note: The Bandit Nano 900MHz ELRS Module fits Nano style connectors. For JR style micro module bays, please consider the Bandit and the Bandit Micro module.
FEATURES
- Packet rates up to 200Hz
- Optimized circuitry for ultra-low power consumption
- Built-in TCXO oscillator
- Low noise, high comfort
- High contrast OLED display
- Innovative convection cooling design
- Wifi and Bluetooth support
- Built-in ExpressLRS backpack
- 5 Directional nav key
- 915/868MHz T Antenna included
- Supports Zorro, Pocket and MT12 Radios
INCLUDES
- 1x Bandit Nano Module
- 1x 900MHz T-Antenna
- 1x Manual
DEFAULT FIRMWARE
- RadioMaster Bandit Nano 900MHz TX
- We wish to thank the ExpressLRS team for their support and testing during the development of the Bandit series. To learn more and support the ExpressLRS project visit: https://www.expresslrs.org
FAQ
- What is the default firmware for the Bandit Nano 900MHz module?
The default firmware for the Bandit Nano is RadioMaster Bandit Nano 900MHz TX. - Where can I find more information and support for the ExpressLRS project?
You can visit the ExpressLRS website at https://www.expresslrs.org for more information and support.
Documents / Resources
 |
RADIOMASTER Bandit Nano Module [pdf] User Manual Bandit Nano, 67934ab7-9a99-44eb-8314-9ba0dfff145b, Bandit Nano Module, Nano Module, Module |