Raddy-logo

Raddy RF75A Shortwave Radio Bluetooth 5.0 APP Control

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-PRODUCT-IMAGE

APP Instruction Manual

Instructions for APP Installation

  1. Turn on the radio RF75A
  2. Download the APP

Android System: Use your mobile browser to scan the following QR code iOS System: Go to “App Store” and search “Radio-CT” to download the App

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-1

Click “download” ➔ Click “continue” ➔ Installation finished, click “open the app” ➔ APP icon is displayed.

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-2

Click the APP icon to enter and use ➔ Click the Bluetooth symbol at the bottom right on the APP ➔ Click “permit” ➔ Click the symbol again ➔ Choose “RF75A-BLE” ➔ “Successful connection”.

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-3

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-4 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-5

No. Symbols Functions
1 Demodulation Demodulation mode symbol
2 Bandwidth Bandwidth
3 SNR Signal-to-noise ratio
4 RSSI Signal intensity
5 VOL Volume symbol
6 Band Click to select the FM, AM, SW, VHF
7 Preset 7-1 : “Preset” display: meaning recall station: Press digital buttons to select the memory station of number and then press “Enter” to confirm

7-2 : “Preset” flashing: mean manual station storage: find the target frequency points, long press [MEMO), “Preset” symbol is flashing, then press the [     ] to select station storageaddress number. Press [MEMO] key to confirm.

7-3 : “Preset” symbol: There are no stored stations

8 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-6 View the device version
9 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-7 Battery symbol
10 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-8 Radio Frequency display
11 KHZ MHZ Unit display
 12 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-9 Edit the name of the frequency station: Long press this location and enter the current frequency according to the language prompt
13 MEMO 13-1  : Press: enter recall station mode: press [        ] button select station.

13-2 : Long press: manual station storage: find the target frequency points, long press [MEMO] key,”Present” symbol is flashing, press the [    ] to select station storage address number, press [MEMO] key to confirm.

14 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-10 Play & pause
15 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-11 Switch between TF card play mode and Bluetooth play mode

Note: If you need to play music in Bluetooth mode, please open the mobile phone Bluetooth connection. select “RF75A” in the search list, you can play after successful connection.

16 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-12 16-1  : Numeric Keypads: press [ENTER] key, input the target frequency, press [ENTER] key for confirm.

16-2  : Recall station: press digital buttons you need, press [ENTER] key for confirm.

16-3  : Frequency: press digital buttons which your need, press [ENTER] key for confirm.

17 METE In SW mode, select meter wave
18 SCAN 18-1  : In reception mode, long press to search the channels stored automatically

18-2  : In WB band, long press to enter alarm mode, long press again to exit

19 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-13 SeVclose the clock
20 MOOE In TF play mode, choose the play mode sequence: repeat all & repeat one & repeat file & random
21 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-14 +/- (adjust the frequency/choosea song/take a channel/choose an address of storing channels)
22 EQ EQ for play mode:
E1:NORMAL; E2:POP; E3: ROCK; E4: JAZZ; E5:CLASSIC; E6:COUNTRY
23 VOL+ – Volume+/-
24 BAND Band switching
 

25

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-15 25-1 : Power on/Power off
25-2 : Disconnect APP connection: after pressing “off” on APP interface, the radio displays time state, long press O on the right of radio)
The radio displays “bLEOFF”, it means APP is disconnected forcibly
26 sos 26-1 : Long press to turn on /turn off SOS alarm
26-2 : Press to turn on /turn off the light
27 LOCK Long press to lock, long press again to unlock
28  

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-16

Connect the mobile APP to the radio
29 Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-17 Equipment calibration time
30

31

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-18REC Set your Sleep Time

Record in Radio reception mode
Note: Insert TF card into the radio before recording press to enter the recording mode press again to exit

Working Modes on APP Interface

Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-19

  • Instruction 1: In play music mode. directly click the symbol on interface to choose an EQ sound effect NORMAL, POP, ROCKJAZZ, CLASSIC, COUNTRY
  • Instruction 2: In TF play mode, click TF card play order to choose:
    • Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-20(Repeat all, the radio displays: rA)
    • Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-21(Repeat one, the radio displays: rO) cm
    • Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-22(Repeat the songs in current folder, the radio displays: rF) )
    • Raddy-RF75A-Shortwave-Radio-Bluetooth-5-0-APP-Control-223(Random play, the radio displays: rr)

Documents / Resources

Raddy RF75A Shortwave Radio Bluetooth 5.0 APP Control [pdf] Instruction Manual
RF75A Shortwave Radio Bluetooth 5.0 APP Control, RF75A, Shortwave Radio Bluetooth 5.0 APP Control, Radio Bluetooth 5.0 APP Control, Bluetooth 5.0 APP Control, 5.0 APP Control, APP Control, Control

References

Leave a comment

Your email address will not be published. Required fields are marked *