PJ1000LIGHT Broadcast
Systems FM Amplifiers
User Manual
PJ1000LIGHT Broadcast Systems FM Amplifiers
SERIES
BROADBAND AIR COOLED AMPLIFIERS
from 1000W to 3500W
MODELS
PJ1000LIGHT PJ2500LCD
PJ3500LCD
FM AMPLIFIERS
- High-gain amplifier with very low input drive power requirement.
- 10% – 100% Output Power continuously adjustable.
- APC Automatic Power Control ensuring reliable operation.
- Enhanced energy saving power supply.
- Exceed 70% efficiency across the bandwidth.
- Remotable from all digital RVR telemetry systems.
- Full compliance with EC, FCC and CCIR standards.
- Ease of access and simplified maintenance.
ORDERING INFORMATION
Model | Description |
PJ1000LIGHT | 1000W High Redundancy Compact Stereo Amplifier. |
PJ2500LCD | 2500W Compact Stereo Amplifier. |
PJ3500LCD | 3500W Compact Stereo Amplifier. |
OPTION
/CNT7/8-150 | 7/8 output RF connector. |
PJ1000LIGHT
1000W High Redundancy Compact Amplifier.
https://www.rvr.it/it/products/compact-amplifiers/pj-lcd-series/fino-a-3-500w/pj1000light-t3x3bkfy/
PJ2500LCD
2500W Compact Amplifier.
https://www.rvr.it/it/products/compact-amplifiers/pj-lcd-series/fino-a-3-500w/pj2500lcd-fcxmnugy/
PJ3500LCD
3500W Compact Amplifier.
https://www.rvr.it/it/products/compact-amplifiers/pj-lcd-series/fino-a-3-500w/pj3500lcd-klc5t19g/
PJ1000LIGHT
Parameters U.M. Value | Notes | |||
GENERALS | ||||
Frequency range | MHz | 87,5 ÷ 108 | ||
Rated output power | W | 1000 | ||
Spurious & harmonic suppression | dBc | <75 (80 typical) | Meets or exceeds all FCC and CCIR rules | |
Working temperature | °C | -5 to + 50 | ||
Working humidity | % | 95 | Without condensing | |
Working altitude | m | Up to 3000 | With adequate air evacuation system in site | |
POWER REQUIREMENTS | ||||
AC Power input |
AC Supply Voltage | VAC | 230 ±15% | |
AC Apparent Power Consumption | VA | 1650 | Monophase | |
Active Power Consumption | W | 1630 | ||
Power Factor | 0,998 | |||
Overall Efficiency | % | Typical 70 | ||
Connector | Terminal Block | |||
MECHANICAL DIMENSIONS | ||||
Phisical dimensions |
Front panel width | mm / inch | 483 / 19 | EIA rack |
Front panel height | mm / inch | 132 / 5 1/4 3HE | ||
Overall depth | mm / inch | 550 / 21,65 | ||
Chassis depth | mm / inch | 500 / 19,69 | ||
Weight | kg | About 25 | ||
Cooling | Forced, with internal fan | |||
Acoustic noise | dBA | < 75 | Leq 3 min @ 1 m | |
AUDIO INPUTS | ||||
RF Input | Connector | N type | ||
Impedance | Ohm | 50 | ||
Driver power for rated output | W | 11 | ||
Max input power before protection | W | 25 | ||
OUTPUTS | ||||
RF Output | Connector | 7/16″ EIA | ||
Impedance | Ohm | 50 | ||
RF Monitor |
Connector | BNC | ||
Impedance | Ohm | 50 | ||
Output Level | dBc | Approx. -60 | ||
FUSES | ||||
On mains | 2 External fuse F 25 T – 10×38 mm | |||
On services | 1 External F3,15 A 2×20 mm | |||
On PA Supply | 3External F 16 A 10x38mm | |||
On aux VDE socket | X |
PJ2500LCD
Parameters U.M. Value | Notes | |||||
GENERALS | ||||||
Frequency range | MHz | 87,5 ÷ 108 | ||||
Rated output power | W | 2500 | 3500 | |||
Modulation type | dBc | <80 (82 typical) | <82 (85 typical) | Meets or exceeds all FCC and CCIR rules | ||
Working temperature | °C | -5 to + 50 | ||||
Working humidity | % | 95 | Without condensing | |||
Working altitude | m | Up to 3000 | Up to 2000 | With adequate air evacuation system in site | ||
POWER REQUIREMENTS | ||||||
AC Power input |
AC Supply Voltage | VAC | 230 ±15% | 230 +10% -15% | 400 +10% -15% | Monophase | Threephases Y | |
AC Apparent Power Consumption | VA | 3578 | 4996 | |||
Active Power Consumption | W | 3571 | 4987 | |||
Power Factor | 0,998 | |||||
Overall Efficiency | % | Typical 70 | ||||
Connector | Terminal Block | |||||
MECHANICAL DIMENSIONS | ||||||
Phisical dimensions |
Front panel width | mm / inch | 483 / 19 | EIA rack | ||
Front panel height | mm / inch | 132 / 3 1/2 3HE | ||||
Overall depth | mm | 670 | ||||
Chassis depth | mm | 650 | ||||
Weight | kg | About 31 | ||||
Cooling | Forced, with internal fan | |||||
Acoustic noise | dBA | < 75 | Leq 3 min @ 1 m | |||
AUDIO INPUTS | ||||||
RFInput | Connector | N type | ||||
Impedance | Ohm | 50 | ||||
Driver power for rated output | W | 30 | ||||
Max input power before protection | W | 35 | ||||
OUTPUTS | ||||||
RF Output | Connector | 7/8″ EIA | ||||
Impedance | Ohm | 50 | ||||
RF Monitor | Connector | BNC | ||||
Impedance | Ohm | 50 | ||||
Output Level | dBc | Approx. -60 | ||||
FUSES | ||||||
On mains | 3 External fuse F 25 T – 10×38 mm | 3 External fuse F 10 T – 6×30 mm | ||||
On services | 1 External F3,15 A 5×20 mm | X | ||||
On PA Supply | 4 Internal F 25 A 10x38mm | 4 Internal F 32 A 10x38mm | ||||
On aux VDE socket | X | X |
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2
40138 Bologna – ltaly
Phone +39 0516010506
sales@rvr.it
www.rvr.it
Documents / Resources
![]() |
R V R PJ1000LIGHT Broadcast Systems FM Amplifiers [pdf] User Manual PJ1000LIGHT Broadcast Systems FM Amplifiers, PJ1000LIGHT, Broadcast Systems FM Amplifiers, Systems FM Amplifiers, FM Amplifiers |