Contents
hide
exciters/transmitters
TEX1000 LCD/PFC
TEX1300 LCD/PFC
TEX2000 LCD
> easy maintenance series
> compact with integrated exciters series
> high fidelity series
TEX1000-LCD front view
Features
- PRIMARY APPLICATION: RVR TEX transmitters offer uncompromised transmission quality at a very attractive price. Ideal for use as drivers for mid-power stations or as transmitters in standalone applications. Adjustable power output from 0 Watt to maximum output power.
- AUDIO PERFORMANCE: key audio features are low distortion and intermodulation values and a high noise/signal ratio.
- HARDWARE FEATURES: RVR TEX transmitters are compact and in deformable thanks to the stainless steel chassis, in 3 rack units only.
- RELIABILITY/CONTINUITY: dual, redundant power supply ensures limited-power operation in the event of a failure for maximum business continuity.
APC (Automatic Power Control) and Foldback protection ensure reliable operation under any operating conditions. - EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
- INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu or via RS232 with all key parameters displayed on LCD.
- INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals.
- REMOTE CONTROL: built-in telemetry system with GSM modem, battery and battery charger (option).
- REGULATORY COMPLIANCE: state-of-the-art technology in full compliance with EC, FCC and CCIR standards.
- USER-FRIENDLY FEATURES: pushbuttons for user/device interaction provide enhanced accessibility, resulting in extreme ease of use.
Configuration software offers a simple, intuitive interface.
stereo/MPX FM exciters 87,5 – 108 MHz
( Oirt and JPN Band upon request )
TEX1000-LCD rear view
Technical specifications
| TEX1000LCD | TEX1300LCD | TEX2000LCD | |
| Parameters | Values | Values | Values |
| GENERALS | |||
| Rated output power | 1000W | 1300W | 2000W |
| Frequency range | FCC -CCIR and other on request | ||
| Operational Mode | Mono, Stereo, Multiplex | ||
| Modulation type | F3E | ||
| Primary Power | 230VAC ±15% or 115VAC | 230VAC ±15% | |
| AC Power Consumption | 1690 VA / 1660 W / PF: 0,98 | 2108 VA / 2065W / PF: 0,98 | 3320 VA / 3300 W / PF:0,99 |
| Overall efficiency | 60% | 63% | 61% |
| Phisical Dimensions (W x H x D) | 483 x 132 x 670 mm | ||
| Weight | 27 kg | 32 kg | |
| Environmental Working Conditions | -10 ÷ +50 °C / 95% relative Humidity non condensing | ||
| Cooling | Forced, with internal fan | ||
| Frequency programmability | From software, with 10 kHz steps | ||
| Frequency stability | ±1 ppm | ||
| Pre-emphasis mode | 0/50 (CCIR) µS, 75 (FCC) µS | ||
| Spurious & harmonic suppression | <75 dBc (80 typical) | ||
| Asynchronous AM S/N ratio | ≥60 dB (typical 68) | ||
| Synchronous AM S/N ratio | ≥50 dB (typical 58) | ||
| MONO OPERATION | |||
| S/N FM Ratio | > 80 dB RMS (typical 83 dB) | ||
| Frequency Response | < ± 0.5 dB 30Hz ÷ 15kHz (typical ± 0.2 dB) | ||
| Total Harmonic Distortion | < 0.1 % 30 Hz ÷ 15 kHz (typical 0.07 %) | ||
| Intermodulation distortion | < 0.02 % with 1 kHz and 1,3 kHz tones | ||
| MPX OPERATION | |||
| Composite S/N FM Ratio | > 80 dB RMS (typical 83 dB) | ||
| Frequency Response | ± 0.2 dB 30Hz ÷ 53kHz / ± 0.5 dB 53kHz ÷ 100 kHz | ||
| Total Harmonic Distortion | < 0.1% 30Hz ÷ 53kHz | ||
| Intermodulation distortion | < 0.05% with 1 kHz and 1,3 kHz tones | ||
| INTERNAL STEREO CODER OPERATION | |||
| Stereo S/N FM Ratio | > 75 dB RMS (typical 77dB) | ||
| Frequency Response | ± 0.5 dB 30 Hz ÷ 15 kHz | ||
| Total Harmonic Distortion | < 0.05% 30 Hz ÷ 15 kHz | ||
| Intermodulation distortion | ≤0.03% with 1 kHz and 1,3 kHz tones | ||
| Stereo separation | > 50 dB 30 Hz ÷ 15 kHz (typical 55 dB) | ||
| AUDIO INPUT CONNECTORS | |||
| Left / Right | XLR balanced; Impedance: 10 k or 600 ohm; Level: -13 to +13 dBu | ||
| MPX unbalanced/RDS | BNC unbalanced; Impedance: 10 k or 50 ohm; Level: -13 to +13 dBu | ||
| SCA/RDS | 2 x BNC unbalanced; Impedance: 10 k; Level: -8 to +13 dBu | ||
| OTHER CONNECTORS | |||
| RF Output | 7/16″ EIA flange type | ||
| RF Monitor | BNC (- 30dBr referred to RF output ) | ||
| Pilot output | BNC (1Vpp) | ||
| Interlock Input | BNC | ||
| STANDARD COMPLIANCE | |||
| Safety | EN 60215:1989 EN60215/A1:1992-07 EN60215/A2:1994-09 |
||
| EMC | EN 301 489-1 V1.4.1 (2002-08) EN 301 489-11 V1.2.1 (2002-11) |
||
| Radio | EN 302 018-2 V1.2.1 (2005-06) | ||
99/5/CE Revision: 03/10
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
Ordering information
| Options for TEX-LCD | |
| Code | Description |
| /CW | Morse-coded station ID code generated through FSK (Frequency Shift Keying) function * |
| /CNT7/8-245 | 7/8″ output RF connector |
| /CNT7/8-295 | 7/8″ output RF connector ** |
| TCPIPINT-TEX | Telemetry system via the Internet *** |
| /TLM-TEX3HE | Telemetry system via internal GSM modem. Battery and battery changer included |
| /TLC-TEX3HE | Internal telemetry system without modem |
| /MODGSM | Telemetry system via external GSM modem *** |
| /MODPSTN | Telemetry system via external PSTN modem *** |
| TELINK-C1 | Telemetry interface ANTLAN/BURK protocol *** |
| TELINK-SNMP2 | Telemetry interface RVR/SNMP 1 HE *** |
* Please specify station name on order.
** Available for model TEX2000LCD.
*** Usable only in combination with /TLC-TEX3HE option.
RVR Elettronica S.p.A.
Via del Fonditore, 2/2c
Zona Industriale Roveri • 40138 Bologna • Italy
Phone: +39 051 6010506 • Fax: +39 051 6011104
e-mail: info@rvr.it • web: http://www.rvr.it
ISO 9001:2000 certified since 2000
Documents / Resources
 |
R V R Elettronica TEX1000 LCD-PFC Exciters Transmitters [pdf] Owner's Manual TEX1000 LCD-PFC Exciters Transmitters, TEX1000 LCD-PFC, Exciters Transmitters, Transmitters |
