Qwiizlab UH25 Max USB-C Docking Station With HDD-SSD Enclosure
How To Connect
- Connect USB-C port (marked as Computer) on the rear of UH25 Max to the thunderbolt on Mac, connect USB-C port(marked as 5V Power) on the rear of UH25 Max to USB-A port on Mac or to power adapter.
- When connecting HDMI (from Mac mini ), HDMI (from the UH25 Max) and DP (from the UH25 Max) at the same time, it do support extend mode of A-B-B. It does not support extend mode of A-B-C.
How To Install HDD / SSD
- Remove the lid on the bottom of the product.
- lnsert 2.5-inch SATA SSD or M.2 SATA/NGFF SSD and M. 2 PCle NVMe SSD into the slots.
- Put the lid back onto the bottom of the product.
Connectivity
Output
- USB3.0 Type A*2
- USB3.1 Type A*1
- USB 3.1 Type C*1
- SD Card Reader*1
- MicroSD Card Reader*1
- M.2 SSD Slot*1
- SATA HOD Slot*1
- DisplayPort*1
- HDMl*1
Input
- Computer
- 5V Power
Documents / Resources
 |
Qwiizlab UH25 Max USB-C Docking Station With HDD-SSD Enclosure [pdf] User Guide UH25 Max USB-C Docking Station With HDD-SSD Enclosure, UH25 Max, USB-C Docking Station With HDD-SSD Enclosure, Docking Station With HDD-SSD Enclosure, Station With HDD-SSD Enclosure, HDD-SSD Enclosure, Enclosure |