QUICK FITTING 1 by 2 Inch Conduit Coupling
Instructions
- CUT IT
Cut the conduit to the required length using a cutting tool.
- CLEAN IT
Clean the conduit thoroughly. - MARK IT
Mark the conduit at the specified insertion depth. - PUSH IT
Push the conduit into the fitting until it reaches the marked depth.
Specifications
| INSERTION DEPTH | FOR CONDUITS SIZED | MARK AT |
|---|---|---|
| PROFUNDIDAD DE INSERCIÓN | 1/2″ | 7/8″ |
| 3/4″ | 15/16″ | |
| 1″ | 1-1/32″ | |
| 1-1/4″ | 1-7/32″ | |
| 1-1/2″ | 1-1/2″ | |
| 2″ | 1-13/16″ |
Removal
To remove the conduit from the fitting, use the Slip Clip™ tool for easy disconnection.
Documents / Resources
 |
QUICKFITTING 1 by 2 Inch Conduit Coupling [pdf] Installation Guide 1 by 2 Inch Conduit Coupling, Conduit Coupling, Coupling |