QuickBOLT 15996PK QB2 Mini Flashing
- Product Name: AHJ CONDENSED PERMIT PACKAGE 2023
- Version: 6
- Model Number: 17662DF
- Compatible Roof Types: Asphalt, EPDM, & TPO
- Patent Number: 8448407
- Manufacturer: A DIVISION OF QUICKSCREWS INTERNATIONAL CORP
Product Usage Instructions
Recommended Materials
- Sealant (MFG approved)
Installation Instructions
- Locate and mark the rafter.
- Predrill the hole.
- Optional: Fill the predrilled hole with MFG approved sealant.
- Optional: Place a ring of sealant around the bottom of the product.
- Q: What type of roofs is this product suitable for?
A: This product is suitable for use on Asphalt, EPDM, and TPO roofs. - Q: Should I always use MFG approved sealant?
A: It is recommended to use MFG approved sealant, but it is optional depending on your installation preferences.
RECOMMENDED MATERIALS
- Tools to locate and mark rafter
- Drill with a 15/64” drill bit
- MFG approved sealant (optional)
- Tool for seperating shingles
- 1/2” Nut Setter
INSTALLATION INSTRUCTIONS
- Locate and mark the rafter
- Predrill the hole
- Optional: Fill the predrilled hole with MFG approved sealant
- Optional: Place a ring of sealant around the bottom of the Microflashing® washer
- Place the Microflashing®, then L-Foot
- Insert the Miniflashing® under the shingles, over the L-Foot
- Insert the Bolt over Miniflashing® and drive until the Microflashing® is compressed and Miniflashing® is secure
To compress Microflashing® properly with QB2 use a 150 minimum torque lbs/inch
Documents / Resources
 |
QuickBOLT 15996PK QB2 Mini Flashing [pdf] Installation Guide 15996PK, 15996PK QB2 Mini Flashing, 15996PK, QB2 Mini Flashing, Mini Flashing, Flashing |
