CPWKP Wireless keypad
Specifications
- Product Name: CPWKP Wireless Keypad
- Manufacturer: Quantek
- Model Number: CPWKP
- Power Source: 2 x 1.5V AA Batteries
- Default Master Code: 999999
Installation
- Unscrew the bottom retaining screw and remove the back plate
from the keypad. - Fix the back plate securely to the wall.
- Fit the keypad back onto the back plate and fit the bottom
retaining screw. - The clear cover must be clipped down when not in use.
Changing the Master Code
Please familiarize yourself with the process before attempting
it, ensuring a maximum of 5 seconds between steps.
- Press B then enter the master code.
- Press 1 B.
- Enter the new master code (6 digits) followed by B.
- Enter the new master code again followed by B.
Changing the Access Codes
Please familiarize yourself with the process before attempting
it, ensuring a maximum of 5 seconds between steps. Do not use the
same code as the master code.
- Press B then enter the master code.
- Press channel number 1, 2, 3, or 4 followed by A.
- Enter the new access code (6 digits) followed by B.
- Enter the new access code again followed by B.
- Test the new access code.
Programming Access Codes into the Receiver or Control
Panel
The channels can be modified with a working remote control if
required. Refer to the instructional video for guidance.
Changing the Batteries
- Undo the bottom retaining screw and remove the keypad from the
back plate. - Undo the 4 Phillips screws in the back of the keypad and remove
the back. - Swap the batteries for 2 new 1.5V AA batteries.
- Reassemble the keypad ensuring the screws are tight to maintain
water tightness.
Resetting the Keypad
- Undo the bottom retaining screw and remove the keypad from the
back plate. - Undo the 4 Phillips screws in the back of the keypad and remove
the back. - Remove one battery from the keypad.
- Press and hold A as you reinsert the battery.
- The keypad will beep twice indicating a successful reset. The
master code is now set to default 999999.
Frequently Asked Questions (FAQ)
Q: What should I do if I forget my master code?
A: If you forget your master code, you will need to reset the
keypad following the provided instructions in the user manual.
Q: How many access codes can be stored in the keypad?
A: The keypad can store up to 4 access codes for different
channels.
11 Callywhite Business Park, Callywhite Lane, Dronfield S18 2XP +44(0)1246 417113 sales@cproxltd.com www.quantek.co.uk
CPWKP
Wireless keypad
Specification
· Number of channels: 4 · Frequency: 868MHz · Transmission range: Up to 50 metres · Power supply: 2 x 1.5V AA batteries (Included) · Code length: 6 digits · IP rating: IP54 (keep front cover clicked shut when not in use) · Dimensions: 90h x 72w x 34d mm · Compatibility: Quantek Receivers & Control Panels. RX-2, RX-2-5A, RX-4, RXMINI1,
RXMINI1-PLUS, RX-T, GDRC, RC1000-MS, RC2000 · Dimensions : 91h x 72w x 33d (mm)
Installation
1. Unscrew the bottom retaining screw and remove the back plate from the keypad. 2. Fix the back plate securely to the wall. 3. Fit the keypad back onto the back plate and fit the bottom retaining screw. 4. The clear cover must be clipped down when not in use.
Scan to view programming video
Changing the master code
Please familiarise yourself with the process before attempting it, you have to a maximum of 5 seconds between steps. Default master code: 999999
1. Press B then enter master code. 2. Press 1 B. 3. Enter new master code (6 digits) followed by B. 4. Enter new master code again followed by B. If anything is entered incorrectly it will beep and flash red 10 times. Please try again from the beginning.
Write down the new master code and keep it safe. If you forget it, you will need to reset the keypad.
Changing the access codes
Please familiarise yourself with the process before attempting it, you have to a maximum of 5 seconds between steps. Do not use the same code as the master code.
1. Press B then enter master code. 2. Press channel number 1, 2, 3 or 4 followed by A. (The keypad can have up to 4 channels, and
therefore 4 codes). 3. Enter new access code (6 digits) followed by B. 4. Enter new access code again followed by B. 5. Test the new access code. If a code is entered correctly, it will flash green. If a code is entered incorrectly, it will beep and the LED will be solid red. Please try again from the beginning.
Programming access codes into the receiver or control panel
1. Press the program/learn button on the receiver for 1 second. 2. Within 15 seconds, enter the 6 digit access code. 3. The LED on the receiver will flash to confirm. 4. Repeat for any additional codes. There is no need to reprogram the receiver if you change an access code. On the RX-2, as default channels 1 & 3 program onto channel 1, channels 2 & 4 program onto channel 2. If programming to an RC1000 or RC2000, channel 1 will open the door, channel 3 will close the door, they must be different codes. If the control panel is set to deadman, then the keypad can only be used to open the door.
The channels can be modified with a working remote control if required. Please see video below.
Changing the batteries
The keypad will alert you when the batteries are low. When you press a button 2 beeps=Low battery warning, 3 beeps=Very low battery warning, change immediately.
1. Undo the bottom retaining screw and remove the keypad from the back plate. 2. Undo the 4 Phillips screws in the back of the keypad and remove the back. 3. Swap the batteries for 2 new 1.5V AA. 4. Put the keypad back together, ensure the 4 screws are tight to maintain water tightness.
Resetting the keypad
1. Undo the bottom retaining screw and remove the keypad from the back plate. 2. Undo the 4 Phillips screws in the back of the keypad and remove the back. 3. Remove one battery from the keypad. 4. Press and hold A as you reinsert the battery. 5. Keypad will beep twice. 6. Master code is now default 999999.
Documents / Resources
 |
Quantek CPWKP Wireless keypad [pdf] Instructions CPWKP Wireless keypad, CPWKP, Wireless keypad, keypad |