QualSights QS-PS Data Broadcasting Device
| Part # | Description |
| QS-PS | The QS-PS data broadcasting device with the latest Bluetooth 5.0 tech and accelerometer inside, mostly helps users in different industries to realize asset or inventory tracking. Also, it is easy for users to wear or carry due to its
portable design. |
INTRODUCTION
QS-PS with the built-in accelerometer can detect if an object (QS-PS attached) is moving or falling. It can be used for asset tracking, activity monitoring, inventory tracking, etc., in different industries.
The user can configure the E8S tag beacon via configuration app BeaconSET+ as well.
FEATURE
- Advertise iBeacon & Eddystone & Sensor data
- Bluetooth® 5.0 chipset nRF52 series
- Low power consumption 3-axis accelerometer
- Included 1pc CR series coin battery replaceable
- The max.60 meters advertising distance
- Compact housing with a key-chainhole
APPLICATION
- Asset tracking
- Activity monitoring
- Inventory tracking
ACCESSORY
- Double-sided adhesive
ACTIVATE E8S
- Takeout the plastic battery sheet from QS-PS to activate device;
CONFIGURATION TOOL
- BeaconSET+ (iOS & Android)
ELECTRONIC PARAMETER
| Item | Value | Remarks |
| Case Color | white | Other colors can be customized |
| Battery Model | 1 x CR series | 230mAh, 3.0V |
| Operation Voltage | 1.8-3.6V | DC |
| Transmission Current | 5.3mA (peak current) | Tested at 0dBm transmission power |
| Transmission Range | 60 meters | Maximum |
| Sampling Interval | 900ms | Accelerometer |
| Sampling Accuracy | +/- 2g | Default |
| Antenna | 50ohm | On board / PCB Antenna |
| Size | 36.5*23.7*5mm | Null |
PARAMETER SETTING
Each QS-PS data broadcasting device has been pre-configured in the factory before the shipment. Here below is given the main parameters and default settings.
| Type | Item | Default Settings |
|
iBeacon |
UUID (16 bytes) | E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity) |
| Major (2 bytes) | 0 | |
| Minor (2 bytes) | 0 | |
| Measured Power | -59dBm9（0xC5) | |
| Tx Power | 0dBm | |
| Interval(ms) | 900ms | |
|
UID |
Instance ID | Random |
| Namespace ID | Random | |
| Measured Power | -24dBm | |
| Tx Power | 0dBm | |
| Interval(ms) | 2000ms | |
|
URL |
URL | http://www.minew.com |
| Measured Power | -24dBm | |
| Tx Power | 0dBm | |
| Interval(ms) | 2000ms | |
|
TLM |
Electricity mV | By default |
| Boot time | By default | |
| PDU packets | By default | |
| Measured power | -24dBm | |
| Tx power | 0dBm | |
| Interval(ms) | 4000ms | |
| INFO | Device name | QS-PS |
| Electricity | By default |
| MAC address | Factory setting | |
| Measured power | -24dBm | |
| Tx power | -8dBm | |
| Interval(ms) | 4000ms | |
|
ACC |
X-axis | 1. It depends on beacon’s real status, static or movement
2. Only working when beacon with accelerometer sensor |
| Y-axis | ||
| Z-axis | ||
| Measured Power | -24dBm | |
| Tx power | 0dBm | |
| Interval(ms) | 4000ms |
COMPATIBILITY
| Supporting device&system |
Module of Supporting device |
| BLE | BLE4.2 and above |
| iOS7.0 and above | iPhone4S, iPhone5/5C/5S
iPhone6/6Plus/6S/6SPlus,iPhone7/7Plus iPad mini/mini2/4/Air/pro, etc. |
| Android4.3 and above | Samsung
Xiaomi ,Huawei ,OnePlus, Vivo, OPPO, etc. |
PACKING INFORMATION
| Details | Inner Box(Battery included) | Outer Box(Battery included) |
| Quantity(QS-PS) | 80pcs / box | 800pcs / carton |
| Net Weight | 520g | 5.2Kg |
| Gross Weight | 750g | 8Kg |
| Size | 30.5 x 11 x 7.2 cm | 32 x 23.5 x 40 cm |
FCC STATEMENT
WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction
Documents / Resources
 |
QualSights QS-PS Data Broadcasting Device [pdf] Instruction Manual QS-PS Data Broadcasting Device, Data Broadcasting Device, Broadcasting Device, Device |