QOMO qpc5 Portable and 4K Resolution
Parts Descriptions
- USB Type-C Port
- Auto Focus/Rotate Button
- Press once: Auto Focus
- Press and hold: Flip Image 0°/180°
- LED Touch Button Press to turn on the LED light (3 levels of brightness control)
- Manually Flip the Camera Head 0° – 180°
- Bolts
- Base Plate
- LED Indicator
- Built-in Microphone
- Camera lens
- LED Light
Getting Started 1
- Lift the camera arm to extend the document camera.
- Press against the base plate of the camera and pull it up, then flip the camera head into position.
Getting Started 2
- Plug the supplied USB cable to the camera and connect the other end into the computer’s USB port.
- Attach the cable clips to the camera arm to fix the USB cable.
Software Download
Using the compatible software
The QPC5 is a standard UVC camera that can be used with a variety of software including third-party video conferencing software Zoom, Microsoft Teams, or Google Meet. However, to get the full functionality of this 4K document camera, we recommend using it with the included QOMO Camera software for document cameras. This software allows you to annotate, save, and record photos and videos. You can download /QCamera free using the link below.
Unpacking
Before use, make sure the following items are included in the package. If anything is missing, contact the retrailer where you purchased the product.
- QPC5 Document Camera
- Carrying Bag
- USB Cable
- USB C to A Adapter
- Cable Clip x 2
- Quick Start Guide
Specifications
Instructions
Thank you for purchasing the QOMO QPC5 document camera. The QPC5 is a 2-in-1 document camera that doubles as a webcam for distance learning and live demonstrations. It is equipped with Al Noise Reduction microphone and a 4K resolution camera. This quick start guide briefly describes the steps to start using your new document camera. If you have any technical or service questions about the products, please reach out at support@qomo.com.
Safety & Environmental Information
FCC STATEMENT
Federal Communications Commission Statement (Class B)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This\ equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction\ manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.
CE Class B (EMC)
This product is herewith confirmed to comply with the requirements set out in the Council Directives on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive 2014/30/EU.
This symbol on a product or on its packaging indicates that the product must not be disposed of with other household waste. Instead, it is your responsibility to ensure the disposal of waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment usually at a Local Amenity Site. The proper\ recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Warranty Information
Warranty Card
Model No: QPC5
This product provides limited liability warranty coverage of two (2) years. For more information, visit www.qomo.com
- Name:…………….
- Email:……………….
- Address:..……………….
- Product S/N:………………….
- Reseller Info.:……………………..
- Date of purchase:…………………
Warranty Exclusions
The following circumstances are excluded from warranty coverage:
- Product damage is caused by catastrophes, thunderstorms, faulty electric power, and environmental factors.
- Defacing of product labeling (label alterations and falsifying, serial number missing, serial number no longer discernible, serial number invalid). All serial numbers are recorded and tracked for warranty purposes.
- Unauthorized changes of non-parts, modifications or alterations, parts removal in or to the products.
- Damage caused by operator error or operator failure to comply with user manual instructions, such as, but not limited to improper storage resulting in the product get wet, corrosion, fell off, squeezed or exposed to inadequate temperature/humid environment.
- Accessories or packing materials such as boxes, user manuals, etc.
CONTACT
Documents / Resources
 |
QOMO qpc5 Portable and 4K Resolution [pdf] User Guide qpc5 Portable and 4K Resolution, qpc5, Portable and 4K Resolution, Resolution |
