Qilive 003826567 2-in-1 Universal Remote Control

PRODUCT INFORMATION

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use quality Alkaline batteries.

KEY DESCRIPTIONS

• Power Switches your devices on and off.
• Setup This key is used to set up the Qilive remote.
• Device keys These keys are used to select which device the Qilive Remote currently controls. After pressing the TV key, the remote will control your TV.
  • To switch to controlling another device, simply press the appropriate key. The devices that can be programmed to each key are as follows:
  • TV: All televisions such as LED, LCD, Plasma, OLED, etc.
  • STB: Set Top Boxes, including Satellite, Cable and Freeview. + Streaming devices such as an Apple TV, Roku Box, Foxtel Now etc. Also works Xbox 360 and Xbox One.
• Guide TV Guide.
• Home Displays the Home Menu.
• Apps brings up the Applications menu on Smart Devices such as Smart TVs or Streaming boxes.
• Menu Access the installation menu of the current device.
• Back Back one step in the Menu.
• Exit Exits the menu.
• Menu Directions and OK
  • Control the menu of the current device.
• Volume Up and Down
  • Control the volume of the current device.
• Channel Up & Down
  • Change channels on the current device.
• Mute Mutes the volume of the current device.
• Last Channel Changes to the last channel viewed.
• Digits Select channels on the current device.
• TV Return to live TV.
• Input Used to select Input on devices.

SETUP

The Qilive Remote is pre-programmed to control some of the most popular devices out of the box. If you have one of the following devices try putting the batteries in and pressing the device key, and then press a few keys to see if the remote works your device:

Device Key To Press

• TV 
• STB

Device controlled

• Samsung TV
• Sky Q Box

If your device is not one of those listed above, or you have extra devices to set up, there are 2 ways to do this. The easiest is SimpleSet which is used for the common brands and devices.

SIMPLESET

If the brand of your device is shown in the SimpleSet picture pointing to a key, you can use the SimpleSet system described in this section, please locate the brand of your device and note the key associated with it.

TV

1. Bush
2. Grundig
3. JVC
4. LG
5. Panasonic
6. Philips
7. Samsung
8. Sharp
9. Sony
10. Toshiba

STB

1. BT / Humax / TalkTalk / Tricolor TV/ YouView
2. Canal+ / CanalSat / Deutsche
3. Telekom / Movistar / T-Home
4. DStv / Foxtel / Multichoice /Sky New Zealand
5. Freebox / Sky Deutschland / Sky Österreich /TechniSat
6. Kabel Deutschland / Vodafone
7. KPN / Sagemcom / SFR
8. Orange / Samsung
9. Sky Ireland / Sky Italia / Sky UK / Sky Deutschland Strong / Vu+
10. Telenet / UPC / UPC Cablecom / Virgin Media / Ziggo

To set up your device:

1. Turn on your device (not on standby) and point the Qilive remote towards it.
2. Press the Device key you wish to set up (for example TV).
3. Hold down the Setup key until the LED under the Device key blinks twice.
4. Hold down the digit for your brand and device \as listed in the tables above – e.g. 7 for a Samsung TV.
5. The remote will send the Power key every 3 seconds.
6. As soon as your device reacts by turning off release the digit.
7. The LED will blink twice and the remote should now operate your device.
   • If you find one or more keys do not work as you expect, start again at step 2 – the remote will start with the next code in the memory.

SETUP BY CODE

If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually. To do this firstly locate your brand in the Code List. Codes are listed by brand and device, and in order of popularity.

1. Turn on your device (not on standby) and point the Qilive remote towards it.
2. Press the Device key you wish to set up (for example TV).
3. Hold down the Setup key until the LED under the Device key blinks twice.
4. Enter the first 4 digit code listed for your brand (e.g. 1840 for LG).
5. The LED will blink twice on the last digit of the code.
6. Now aim the remote towards your device and press the Power key.
7. If the device turns off your remote is ready to use. If not, repeat steps 2-6 with the next code in the list.

LEARNING

Your Qilive remote control can learn any function from any other working remote control. This is a quick and easy one-time setup that allows to control any infrared controlled device you have in your living room. It also allows you to add a key or keys that may be missing to a spare key on the Qilive. To do this, firstly make sure you have all your original remote controls to hand, and that they have working batteries in. To learn functions, the original remote should be approximately 3cm from the Qilive remote, pointing towards it:

1. Press the Device key for the device you want to learn functions onto.
2. Hold down the Setup key until the LED under the Device key blinks twice.
3. Press 975 – the LED should blink twice.
4. Press and release the key you want to learn a function onto (for example the TV Power key) – the LED will begin to flash rapidly.
5. Press and release* the corresponding key on the original remote, for example Power.
6. The LED will blink twice to indicate the key has been learned correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple remotes, but only one function per key.
8. When you have learned all the functions you require, press and hold Setup key until the LED blinks twice.

Some remotes send commands differently. If you find a function cannot be learned, try holding down the key on the original remote instead of pressing and releasing.

Hints:

• If the LED shows one long blink at step 5, the function was not learned correctly, please try again from step 4.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
• If one or more of your original remotes aren’t working, you can still set up the Qilive remote by SimpleSet or Code Set Up.

Deleting a learned function

If you want to delete a learned function and return that keys to its original state, you can use the following procedure:

1. Press the Device key for the device you want to learn functions onto.
2. Hold down the Setup key until the LED under the Device key blinks twice.
3. Press 976 – the LED should blink twice
4. Press the key you want to reset twice – the LED should blink twice and the learned function has been deleted.

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it’s possible to set up your Qilive remote to control the Volume and Mute of this device. There are two ways to do this:

AUDIO SIMPLESET

If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the SimpleSet method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section.

Note that each of the brands has a digit associated with it, for example 4 for LG (and JVC).

To set up your remote to control your Sound Bar / Audio Device, first make sure your TV and Sound Bar / Audio Device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function). Next:

1. Hold down the SETUP and VOLUME UP buttons together until the LED will blinks twice.
2. Now point the remote towards your Sound Bar / Audio Devices and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.
3. As soon as your Sound Bar / Audio Device mutes the volume, release the digit key. The LED will blink twice.
4. Next, hold down the SETUP and VOLUME DOWN keys until the LED blinks twice. The volume up, down and Mute keys should now control your Audio Device.

AUDIO CODE SETUP

If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:

1. Hold down the SETUP and VOLUME DOWN keys until the LED blinks twice.
2. Hold down the SETUP and VOLUME UP keys until the LED blinks twice.
3. Enter the first 4 digit code for your Sound Bar / Audio Device. The LED should blink twice on the last digit.
4. Now try the Volume Up, Down and Mute and see if they control your Sound Bar or Audio Device.
5. If they work, your remote is set up. If not try again from step 1 using the next code in the list.

RESET VOLUME CONTROL

To reset the volume control to the original setting:

Hold down SETUP and VOLUME DOWN keys until the LED blinks 4 times. Volume control is now reset.

GUARANTEES

Qilive guarantee: General terms & conditions.

• The Qilive guarantee is a commercial guarantee offered by SAS OIA, registered to 200 rue de la recherche, 59650 Villeneuve d’Ascq, for Qilive brand products, within its capacity as manufacturer.
• The Qilive guarantee is applied without prejudice to your rights to benefit, freely, from the legal compliance guarantee applicable in the country of marketing. For further information on the legal compliance guarantee, please refer to your retailer’s T&Cs of Sale (General Terms and Conditions of Sale).

What is covered by the Qilive guarantee?

• A Qilive guarantee covers the repair or replacement with equivalent features of your Qilive appliance if it is found to be defective due to a material fault or a manufacturing fault during the guarantee period.
  • Repaired or replaced products may include new and/or repackaged hardware and components. If the product cannot be repaired or replaced, Qilive will refund the
    purchase price indicated on the proof of purchase.

What isn’t covered by the Qilive guarantee?

• Qilive appliances are designed and manufactured to continuously offer high performances in normal domestic environments. If a Qilive appliance is used in line with the intended usage and it breaks down during the guarantee period, we are liable to repair or replace it. Nevertheless, in some circumstances the Qilive guarantee does not cover the repair or replacement of an appliance. These circumstances are clearly indicated. The following cases are not covered:
• Normal wear, including aesthetics (e.g. scratches, dents or vandalism) and parts which may wear over time (e.g. fuse, belt, tyre, brake, filters, etc.)
• Damage or issues caused by incorrect use or use which doesn’t comply with the serial plate or the user manual, or by an accident or alteration.
• Damage caused by failure to comply with the appliance’s maintenance recommendations.
• Use or storage conditions which are detrimental to the good conservation of the appliance (oxidation, corrosion), use of energy, use or installation non-compliant with the manufacturer’s instructions, or negligence or use of peripherals, software or consumab s which are unsuitable.
• Professional, collective, industrial or commercial use of the product, or use for purposes other than normal domestic purposes in the country where it was purchased.
• Damage caused by external sources, such as transport, weather conditions, electrical outages or power surges.
• Modified products, products with damaged, altered, erased or rusted guarantee seals or serial numbers.
• Damage caused by any intervention of non-authorised persons.
• Software updates as a consequence of changes to network settings
• Damage caused by elements external to the appliance (foreign bodies, insects, etc.)
• Appliance content – freezer, washing machine, etc. – (food, clothing, etc.)
• Product failure resulting from the use of third-party software to modify, change or adapt the product as supplied.
• Product failure resulting from use of the product without the accessories supplied with it or approved by Qilive.

The customer is responsible for regularly backing up the data contained on their hard disk or in the internal memory of their device, and this before any claim is submitted. Qilive cannot be held liable for the loss or destruction of stored data, nor may it be held liable for damage caused to software resulting from, in particular, a restoration or breakdown. In the same sense, Qilive is not required to check that SIM/SD cards have been removed from returned products.

What are the modalities of the guarantee?

The modalities of the Qilive guarantee are as follows: The guarantee enters into effect on the date of purchase (or date of delivery if this is later). You’ll need to provide proof of delivery/purchase before any intervention on your guaranteed appliance. Please note that, without this proof, any work carried out will be invoiced. Please keep your purchase receipt or delivery note. Any interventions will be carried out by Qilive or its authorised agents. Any replaced par becomes the property of Qilive. The guarantee offers advantages which are in addition to your legal rights as a consumer and do not have any impact on the latter rights.

How to apply the Qilive guarantee

To request the repair or replacement of your product under the Qilive guarantee, for any country other than France, please return your product to the service desk of your place of purchase along with your proof of purchase (e.g. the receipt) and the accessories provided with the product, including those necessary for its correct To apply the guarantee in France, please submit a request on our website: https://auth.sav-login.auchan.fr. The following information will be required: date of purchase, model and serial or IMEI number (this information generally features on the product, packaging or proof of purchase).

When does the guarantee become effective?

The Qilive guarantee is effective from the date of purchase or delivery of your appliance, the latest date being valid. Your product is guaranteed by Qilive 3 years for parts and labour.

Can Qilive guarantees be transferred?

Qilive guarantees can be transferred with the appliance, as long as the original proof of purchase from a recognised retailer, as well as proof of any change of ownership of the appliance, confirming the correct operational condition of the appliance at the time of change of ownership.

CODE LIST

TV

TV | STREAM

STREAM | STB

STB

STB | AUDIO

AUDIO

more information

• www.auchan-retail.com/contact

FAQs

• Q: What batteries should I use with the Qilive remote?
  • A: Use quality Alkaline batteries to avoid the risk of explosion.
• Q: Which devices can be controlled with the Qilive remote?
  • A: The remote can control TVs (LED, LCD, Plasma, OLED), Set Top Boxes (Satellite, Cable, Freeview), Streaming devices (Apple TV, Roku Box, etc.), and gaming consoles like Xbox 360 and Xbox One.

Documents / Resources

Qilive 003826567 2-in-1 Universal Remote Control [pdf] User Manual 003826567, 003826567 2-in-1 Universal Remote Control, 003826567, 2-in-1 Universal Remote Control, Universal Remote Control, Remote Control, Control

References

• User Manual