QIIRUN AI-9 Fusion Splicer Machine Instruction Manual

OPTICAL FIBER FUSION SPLICER AI-9

Contents hide

Fiber alignment	Core/cladding alignment / Manual alignment
Splicing time	5S
Heating time	15S
Heating mode	Automatic heating（Preheating）
Focus mode	Six motors Auto focus
Applicable Fibers	SM(G.652&G.657)、MM（G.651）、DS(G.657)、 NZDS（G.655）
Splice Loss	0.025dB（SM）、0.01dB（MM）0.04dB（DS/NZDS
Control technology	Real-time control and calibration of fusion ARC
Return loss	Better than 60DB
Fiber diameter	Cladding Diameter：80-150μm Coating Diameter：100-1000μm
Fiber Cleave Length	Coating less than 250µm：8-16mm Coating less than 250-1000µm:16mm
Software updates Length	Automatically update、 Update by a key
Boot time	1 second
Language Setting	10 languages to switch freely
Tension Test	Standard 2N
Fiber holders	3 in 1 fiber holder, SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable
Magnification	300 for X or Y view, 150 for X or Y view
Screen	5 inch TFT color display
Splicing Mode	Normal / high precision splicing
Splicing method	Fully automatic、Step by step splicing
Splicing record storage	Synchronize to the phone, the server to cloud storage unlimited
Built-in battery	7800 mA high-capacity lithium battery, charging time ≤ 3.5 hours, continuous splicing and heating about 260 times
Power supply	Input AC100-240V 50 / 60HZ, output DC13.5V / 4.8A, the current power mode can be identified, real-time detection of battery power
Shrinkable tube	60mm、50mm、40mm、25mm
Product protection	Waterproof, dust proof, shock-resistant