qi2 TKWC-056 2 in 1 Wireless Charge Stand
Specifications
- Size: 73 x 65.2 x 15.7mm
- Material: ABS + Aluminum + Silicone
- Interface: USB-C
- Input: DC5V/2A, 9V/2.77A
- Output1: Max. 15W (Phone)
- Output2: Max. 2.5W (Apple Watch)
- Compatible with charger above PD25W
Connect the USB Cable to a PD Power Adaptor and insert the USB end of the Cable into a USB Power adaptor.
- Connect the USB C to the wireless charger by inserting the USB C end of the Cable into the charging port of the Qi Wireless Charger.
- Place your Qi-enabled device onto the pad to charge. Make sure to position your device centrally on the pad for charging.
- The charging icon will appear at the top of your device’s screen once charging is initiated.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Packaging Accessories
- Qi2 wireless charge stand x1
- USB-C charging cable x1
- User manual x1
Product Parameter
- Product Name: Qi2 2 in 1 wireless charge stand
- Material: ABS + Aluminum + silicone
- Dimension: 73 x 65.2×15.7mm
- Interface: USB-C
- Input: DC5V/2A,9V/2.77A
- Output1: Max.15W (Phone)
- Output2: Max.2.5W (Apple Watch)
- Compatible with charger above PD25W.
Step for usage
- Connect the USB Cable to the PD Power Adaptor and insert the USB end of the Cable into a USB Power adaptor.
- Connect USB C to the wireless charger and insert the USB C end of the Cable into the charging port of the Qi Wireless Charger.
- Place your Qi-enabled device onto the pad to charge place your device centrally on the pad to charge.
- The charge icon will appear at the top of your device’s screen.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device hay not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Packaging accessories:
- Qi2 wireless charge stand *1 USB-C charging cable *1 User manual *1
FAQs
Q: How do I know if my device is Qi-enabled?
A: Most modern smartphones that support wireless charging are Qi-enabled. You can also check your device’s specifications or contact the manufacturer for confirmation
Q: Can I charge both my phone and Apple Watch simultaneously on this wireless charge stand?
A: Yes, this wireless charge stand supports charging both a phone (up to 15W) and an Apple Watch (up to 2.5W) simultaneously.
Documents / Resources
 |
qi2 TKWC-056 2 in 1 Wireless Charge Stand [pdf] User Manual 2AV8L-TKWC-056, 2AV8LTKWC056, TKWC-056 2 in 1 Wireless Charge Stand, TKWC-056, 2 in 1 Wireless Charge Stand, Wireless Charge Stand, Charge Stand, Stand |
