QFX BT-1-COMBO
Specifications
- Product Dimensions
5 x 11 x 7 inches - Item Weight
2 pounds - Batteries
1 Lithium Ion batteries - Speaker Type
Woofer - Connectivity Technology
Bluetooth, Auxiliary, USB - Brand
QFX
Introduction
For True Wireless Stereo, there are two 3″ Bluetooth speakers. AUX inputs, USB ports, Micro SDTM ports, FM radio, LED party lights Battery-operated with handles.
PANEL FUNCTION
- Mode (LINE IN, MP3, FM, BT)
- Click for Previous Song (FM: Previous channel) Hold it for a second for lower the volume
- Play/ Pause (FM: Automatic Search)
- Click for Next Song (FM: The next channel) Hold it for a second for rise the volume
- USB socket
- Micro SD card socket
- Charging socket (DC 5V)
- Audio input socket
- Power Switch
Connecting to Bluetooth
- The product is on with AUX mode. Click the “MODE” button, once you hear ding-dong sound. BT mode is on.
- Turn on your smartphone’s BT and search for the device. Then you will read “QFX BT-1” on your smartphone.
- Connect with “QFX BT-1” and click the ok on the smartphone. “connected” message will appear.
- Connection is successful. (play and select music with a smartphone when connected through Bluetooth).
Micro-SD Function
- Press the “MODE” button on the product to switch to TF mode or just insert a Micro SD card. TF mode will start automatically.
- Press “PLAY/PAUSE” to continue play/pause music.
- Press the “NEXT” button to go to the next song.
- Press “PREVIOUS” to go back to the previous song.
USB Function
- Press the “MODE” button on the product to switch to USB mode or just insert a USB flash drive. USB mode will start automatically.
- Press “PLAY/PAUSE” to continue play/pause music.
- Press “NEXT” button to go to the next song.
- Press “PREVIOUS” to go back to the previous song.
FM Radio Function
- Press “MODE” on the product to switch to FM mode. The radio will start automatically. Press “PLAY/PAUSE” to enter into automatic FM channel searching.
- Press the “NEXT” button to go to the next frequency.
- Press “PREVIOUS” to go back to the previous frequency.
Technical Parameters
- Speaker Unit: 1×3”
- Impedance: 2 ohm
- Frequency Response: 40Hz-16KHz
- Signal-to-Noise Ratio: ≧85dB
- Total Harmonic Distortion: ≦0.05 1W
Frequently Asked Questions
How can I activate pairing mode on my Qfx speaker?
To select Bluetooth mode, lightly click the MODE/LIGHT button on the control panel. Open the Bluetooth settings on your phone, tablet, or another Bluetooth-enabled audio device simultaneously, then select “BT-87” (there is no need to provide a matching code), and the device and the unit will connect through Bluetooth.
To select Bluetooth mode, lightly click the MODE/LIGHT button on the control panel. Open the Bluetooth settings on your phone, tablet, or another Bluetooth-enabled audio device simultaneously, then select “BT-87” (there is no need to provide a matching code), and the device and the unit will connect through Bluetooth.
How long does it take a Qfx speaker to charge?
Make sure to completely charge the PBX-61081 BT before usage in order to prolong the life of the internal battery. If you don’t charge your device right away, the battery’s performance may suffer. A complete recharge takes about 8 to 12 hours. Use it while it’s charging by plugging it in.
Make sure to completely charge the PBX-61081 BT before usage in order to prolong the life of the internal battery. If you don’t charge your device right away, the battery’s performance may suffer. A complete recharge takes about 8 to 12 hours. Use it while it’s charging by plugging it in.
How can I tell when my Qfx speaker is fully charged?
Even if the battery power is low, it will turn on when attached to a power source. The power adaptor will automatically start charging once it is connected to a power source (5–6 hours to fully charge the lithium battery). The battery indication light will turn red when the battery power is low.
Even if the battery power is low, it will turn on when attached to a power source. The power adaptor will automatically start charging once it is connected to a power source (5–6 hours to fully charge the lithium battery). The battery indication light will turn red when the battery power is low.
How can I tell when the battery in my Bluetooth speaker is full?
A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.
A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.
Can I use my Bluetooth speaker when charging?
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
Can a speaker be charged via USB?
Yes, you may power the speaker using a USB power adapter.
Yes, you may power the speaker using a USB power adapter.
Bluetooth: Does it require a charger?
Bluetooth headsets typically have their own chargers. If you don’t have a specific charger, you can still find the same charger with the same rated output power and the same charging interface (some with a small mouth and a round hole and some with the MiniUSB universal interface).
Bluetooth headsets typically have their own chargers. If you don’t have a specific charger, you can still find the same charger with the same rated output power and the same charging interface (some with a small mouth and a round hole and some with the MiniUSB universal interface).
Is it possible to fix a damaged charging port?
The gadget may become permanently broken if the wrong tool is used or if the repair is not done correctly. But you can rely on the Phone Clinic’s professionals to fix your iPhone or Android phone correctly the first time.
The gadget may become permanently broken if the wrong tool is used or if the repair is not done correctly. But you can rely on the Phone Clinic’s professionals to fix your iPhone or Android phone correctly the first time.
Is Bluetooth compatible with charging?
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
Why does my speaker’s USB not function?
Even when the driver is connected and the volume is set to high, USB speakers occasionally fail to play any sound. This behaviour might not be altered by hot-plugging the device. To get around this, restart the USB speakers.
Even when the driver is connected and the volume is set to high, USB speakers occasionally fail to play any sound. This behaviour might not be altered by hot-plugging the device. To get around this, restart the USB speakers.
