QAZQA 102882 Lamp and Light IE
Specifications
- Model: Master 70 SL / Master 111 SL
- Compatible Bulbs: AR70-GU10 Max. 50W, AR111-GU10 Max. 50W
- Dimensions:
- Master 70 SL: 130mm x 120mm x 82mm
- Master 111 SL: 110mm x 82mm x 200mm
- Weight: Varies by model
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Insert the compatible bulb (AR70-GU10 or AR111-GU10) into thefixture following the manufacturer’s guidelines.
- Mount the fixture securely in the desired location using appropriate hardware.
Operation
- To turn the light on, switch the power source to the “ON” position. To turn it off, switch to the “OFF” position.
Maintenance
- Regularly clean the fixture and bulb to ensure optimal performance. Replace bulbs when they reach the end of their lifespan.
FAQ
- Q: What should I do if the light flickers?
- A: Check the bulb connection and ensure it is securely in place. If the issue persists, try replacing the bulb with a new one.
- Q: Can I use bulbs with higher wattage than recommended?
- A: It is not recommended to exceed the maximum wattage specified as it may lead to overheating and potential damage to the fixture.
Safety Precautions
POWER
POWER OFF
POWER ON
INSTALLATION INSTRUCTIONS
DIMENSION
AR7O
AR111
CONTACT
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert, The Netherlands
- www.qazqa.nl
FittinQ LTD
- 55 Baker Street, London, W1U 7EU United Kingdom
Documents / Resources
 |
QAZQA 102882 Lamp and Light IE [pdf] Instruction Manual 102882, 102883, 102884, 102885, 102886, 102887, 102888, 102889, 102882 Lamp and Light IE, 102882, Lamp and Light IE, Light IE, IE |