QA1 52825 Front Sway Bar
TOOLS AND SUPPLIES REQUIRED
- Floor Jack
- Jack Stands
- Ratchet & SAE or Metric Socket Set
- SAE or Metric Wrench Set
- Grease Gun
Installation Instructions
- Raise the vehicle and support it with jack stands on a stable surface.
- Remove the end-links from the vehicle. (Figure 1)
- Support the sway bar and then remove the bushing brackets from the frame to remove the sway bar. (Figure 2)
Caution: Sway bars are heavy steel parts that can cause injury if not supported during removal or installation.
- Apply the supplied grease to the QA1 sway bar bushings where it will contact the sway bar. Note that the bushings have a split to ease installation. Install the bushings on the QA1 sway bar. (Figure 3)
NOTE:
Some factory vehicles came with a front sway bar mounted under the wonder bar, a support bar mounted between the frame rails for steering support. This QA1 sway bar should be mounted in the factory location under the factory wonder bar. Consider upgrading to the QA1 Wonder Bar part number 52122. - Install the included spacers (#4) between the frame rail and sway bar bushings. If the car has a wonder bar, mount the spacers between the wonder bar and the bushings. The bolt holes are offset. Ensure the plates and brackets are in the correct orientation and location before installation. (Figure 5) The same figure 5 shows the three additional bolts for the wonder bar mounting.
- Torque the bushing bracket bolts to 37 lb-ft
- With the suspension loaded, install the supplied end link kits the same way the OEM links were installed. (Figure 4) The end links will not be able to be installed with the suspension at full droop. With the new bushings having never been compressed, the end links may seem too short. Clamps or straps may aid in compressing the bushings during installation.
NOTE:
If installing QA1 lower control arms, the lower control arms will come with a different style end link and instructions on how to install this bar to the QA1 control arms. - Tighten the sway bar end-link bushings to 15 lb. ft.
- Check for any contact with the steering linkage, brake line, or frame braces. Turn the wheel from full-lock left to full-lock right to verify sufficient clearance. Adjust the sway bar as needed.
- Use caution on the first test drive until you are accustomed to the vehicle’s new response to steering inputs.
DEDICATED TECH SUPPORT
QA1 is dedicated to providing quality support and instructions. We employ passionate racers and car enthusiasts who know our products and the industry to better serve you.
- Frequently Asked Questions
- Quick Tips
- Install Information
- Tuning and Repair Guides
- Other Technical Information
youtube.com/qa1tech
linkedin.com/company/qal
instagram.com/qalmotorsports
facebook.com/qalmotorsports
Technical Support Line: 952-985-5675
Email: sales@QA1.net
READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY BEFORE STARTING INSTALLATION. PRODUCTS THAT HAVE BEEN INSTALLED ARE NOT ELIGIBLE FOR RETURN. USE THE PROPER JACKING LOCATIONS. DEATH OR SERIOUS INJURY CAN RESULT IF INSTRUCTIONS ARE NOT CORRECTLY FOLLOWED. A GOOD CHASSIS MANUAL, AVAILABLE AT YOUR LOCAL PARTS STORE, MAY ALSO AID IN YOUR INSTALLATION.
DISCLAIMER / WARRANTY
QA1 WARRANTS THAT THE PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR ONE YEAR FROM THE DATE OF SALE TO THE ORIGINAL PURCHASER. QA1 MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
QA1 SHALL HAVE NO OBLIGATION UNDER THE FOREGOING WARRANTY WHERE THE DEFECT IS THE RESULT OF IMPROPER OR ABNORMAL USE, YOUR NEGLIGENCE, VEHICLE ACCIDENT, IMPROPER OR INCORRECT INSTALLATION, OR MAINTENANCE, NOR WHEN THE PRODUCT HAS BEEN REPAIRED OR ALTERED IN ANY WAY. QA1’S LIABILITY IN THE CASE OF DEFECTIVE PRODUCTS SUBJECT TO THE FOREGOING WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT, AT QA1’S OPTION, OF THE DEFECTIVE PRODUCTS.
THE USER UNDERSTANDS AND RECOGNIZES THAT RACING PARTS, SPECIALIZED STREET ROD EQUIPMENT, AND ALL PARTS AND SERVICES SOLD BY QA1 ARE EXPOSED TO MANY AND VARIED CONDITIONS DUE TOHOWH THEY ARE INSTALLED AND USED.
QA1 SHALL BEAR NO LIABILITY FOR ANY LOSS, DAMAGE OR INJURY, EITHER TO A PERSON OR TO PROPERTY, RESULTING FROM THE INSTALLATION, DIRECT OR INDIRECT USE OF ANY QA1 PRODUCTS, OR INABILITY OF THE BUYER TO DETERMINE PROPER USE OR APPLICATION OF QA1 PRODUCTS.
EXCEPT THE LIMITED LIABILITY WARRANTY SET FORTH ABOVE, QA1 SHALL NOT BE LIABLE FOR ANY CLAIMS, DEMANDS, INJURIES, DAMAGES, ACTIONS, OR CAUSES OF ACTION WHATSOEVER TO BUYER ARISING OUT OF OR CONNECTED WITH THE USE OF ANY QA1 PRODUCTS. MOTORSPORTS ARE DANGEROUS; AS SUCH, NO WARRANTY OR REPRESENTATION IS MADE AS TO THE PRODUCT’S ABILITY TO PROTECT THE USER FROM INJURY OR DEATH. THE USER ASSUMES THAT RISK!
Documents / Resources
 |
QA1 52825 Front Sway Bar [pdf] Installation Guide 52825, 52122, 52825 Front Sway Bar, 52825, Front Sway Bar, Sway Bar, Bar |