How do I turn off the child lock on the Roborock Qrevo Edge?
To turn off the Child Lock on your Roborock Qrevo Edge Series vacuum, you can use the following methods: Using the App: Open the…
Manuals+ Q&A
Vacuum Cleaner questions & answers
Browse answered questions about Vacuum Cleaner, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
The vacuum cleaner does not recognize that the handle is unlocked and will not start.
Based on the Roborock Flexi manual, the vacuum cleaner is designed to only operate when the cleaning head is unlocked. If the device is…
Why is my vacuum cleaner showing an E8 error code and failing to charge?
The instruction manual for the FABER FVC X-CYCLONE 151 does not explicitly list an "E8" error code in its troubleshooting table. However, based on…
Why is my Faber FVC X-CYCLONE 151 vacuum not charging and showing a light code?
Based on the manual for the FABER FVC X-CYCLONE 151, if your vacuum is not charging correctly, please follow these troubleshooting steps: Check Connections:…
How do I clean the fine dust filter and the vacuum filter?
To clean the filters on your UMLo V11 Cordless Vacuum Cleaner, follow these steps based on the manual's maintenance guide: Disassembly: Detach the main…
Why do I need to connect to the app to change the robot's language?
For the ECOVACS T50 OMNI Gen2, advanced settings such as voice language, firmware updates, and cleaning schedules are managed through the ECOVACS HOME App.…
Why are the power button and suction level indicators flashing simultaneously on my NADALY N16 vacuum, and why won't it turn on?
Based on the NADALY N16 manual, there are a few specific conditions that cause the display indicators to flash or alarm: Wrong Adapter Alarm:…
Why does my vacuum cleaner only last 15 minutes after a full charge and lack suction power?
Based on the VACUSTICK HY-118 manual, here are the steps to address battery and suction issues: Charging: The manual specifies a charging time of…
How do I replace the battery on the 360 S8 robot vacuum?
The user manual for the 360 S8 Robot Vacuum Cleaner does not provide a step-by-step guide for user-performed battery replacement. However, it contains the…
Do I always need to put water in the robot? Can I vacuum without water? Why is the dustbin empty while debris accumulates on the robot itself?
Based on the manual for the Sulfar BR151 (also referred to as BR150), here is the guidance for your questions: Vacuuming without water: Yes,…
Can the Eureka NER700 robotic vacuum be operated without the app?
Yes, you can operate the Eureka NER700 Series robotic vacuum without using the mobile application. The vacuum features physical buttons on the unit for…
How do I perform mapping with the RedRoad E2 robot vacuum?
To perform mapping and initial setup for your RedRoad E2 Robot Vacuum Cleaner, follow these steps to connect it to the app and start…
The wall mount does not fit.
If the wall mount for your Powerffy A17 Cordless Vacuum Cleaner does not seem to fit, please check the following: Orientation: Ensure the wall…
Why has the suction power significantly decreased on my Eureka V1801A-80, and could it be due to the filter foam not covering the entire area or the filter being old?
A significant decrease in suction power is often related to the filtration system or blockages. Based on the Eureka V18C01ACM2EU manual (which shares similar…
What is the part number for the wand for the Dyson Outsize Plus vacuum cleaner?
The specific part number for the wand is not listed in the user guide, as Dyson often uses different colors and part numbers for…
Where can I find the hose adapter spare part for the Hozelock 1752 Pond Vacuum?
For the Hozelock 1752 Pond Vacuum Cleaner, the hose adapter is identified as part F in the user guide. While the manual lists specific…
Where can I find the hose adapter spare part for the Hozelock 1752 Pond Vacuum?
According to the Hozelock 1752 Pond Vacuum Cleaner manual, the Hose Adaptor is identified as part F in the components list. While the manual…
Why is my Roborock F25 showing a red light and not charging when plugged in?
If your Roborock F25 displays a red light and fails to charge while on the dock, please try the following troubleshooting steps: Check Charging…
What is the battery charging time for the Proscenic P20?
Based on the provided manual for the Proscenic P20, the specific charging time in hours is not explicitly listed in the technical specifications section.…
Why are the LED lights on the floor head of my IZZY vacuum cleaner not turning on?
If the LED lights on the floor head (motorized brush) of your IZZY IZ-4008 vacuum cleaner are not turning on, it is often due…
Why is my Pure Clean PUCRC25 not working after I disassembled it for cleaning and reconnected the internal cables?
Since you have already verified that the internal connectors are in order and the battery is charged, you should attempt a battery reset, which…
Why is my yeedi 2 Hybrid vacuum cleaner spinning in circles?
If your yeedi 2 Hybrid is spinning in circles, it is usually caused by a blockage or dirt interfering with the sensors or wheels.…
Why is my yeedi 2 hybrid spinning in circles and unable to find the docking station after maintenance?
Based on the yeedi 2 hybrid manual, if your robot is spinning in circles or cannot find its base after maintenance, please check the…
How do I remove the dust collector from the Deerma DX700S vacuum cleaner?
To remove the dust collector (dustbin) from your Deerma DX700S for cleaning, please follow these steps based on the manual's diagrams: Ensure the vacuum…