Why is the front roller not turning and why is the vacuum hard to push?
If the front roller (Soft Roller) is not turning and the vacuum is difficult to push, please follow these troubleshooting steps based on the…
Manuals+ Q&A
Upright Vacuum questions & answers
Browse answered questions about Upright Vacuum, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I remove the pre-motor filter on the BISSELL 3534 Cleanview Rewind?
To remove the pre-motor filter on your BISSELL Cleanview Rewind (Model 3534), follow these steps: Remove the Dirt Tank: Press the tank release button…
How do I change the belt and reassemble the beater bar on a Eureka Innova NEU700 vacuum?
The provided service documentation for the Eureka Innova NEU700 (Midea V18P01FP25NA) does not contain specific step-by-step instructions for belt replacement or beater bar reassembly.…
Where can I find information about Tornado products or a local address in Vietnam?
Tornado Industries is a U.S.-based company located in Fenton, Missouri. Based on the provided manual and official website information, there is no specific address…
Why will my Shark NV150 not power on, and how can I get a warranty replacement?
If your Shark NV150 Navigator Swivel Pro is not powering on, please try the following troubleshooting steps before seeking a replacement: Check the Power…
How do I repair the power nozzle on my Shark NV22S after parts fell out, and where do the internal components go?
Regarding the Shark Navigator NV22S, the "two black block stone type things" you described are likely the carbon brushes from the motor or internal…
How do I disassemble or remove the brushroll?
Based on the Shark LIFT-AWAY ADV Upright Vacuum manual, the main brushroll is self-cleaning and is not designed to be fully disassembled by the…
What is the name of the spring and casing located underneath the BISSELL 3508 Series vacuum?
Based on the instruction manual for the BISSELL 3508 Series Cleanview Compact, the primary components located underneath the vacuum (the "foot") are the Brush…
Where can I buy a full accessory kit for the Shark UV730 Navigator Lift-Away vacuum?
To purchase a full accessory kit or individual replacement parts for your Shark UV730 Navigator Lift-Away, you should visit the official Shark parts and…
How do I troubleshoot a Shark DuoClean brush roller that is not rotating, and how do I access the base?
If your Shark DuoClean brush roller has stopped rotating while the motor is still running, please follow these troubleshooting steps based on the manual:…
Why is the hose on my Dyson Ball Animal 3 not working even though there are no blockages?
If your Dyson Ball Animal 3 hose is not working (lacks suction) despite no visible blockages, it is often due to the machine being…
How do I remove the brushroll on a Shark Rotator LA500 vacuum?
For the Shark LA500 Series Rotator Lift-Away ADV, the brushroll is designed to be cleaned without being fully removed from the floor nozzle. This…
How do I clean the filters on the Shark Navigator Lift-Away Upright Vacuum?
To clean the filters on the Shark Navigator Lift-Away Upright Vacuum, please follow these steps: 1. Regularly rinse and replace the filters to maintain…
How do I adjust the suction power on the Shark Corded Upright Vacuum with Duo-Clean and Lift-Away Technology?
To adjust the suction power on the Shark Corded Upright Vacuum with Duo-Clean and Lift-Away Technology, you can use the Suction Control Slider located…
How often should I clean the filters on the Shark Vertex Vacuum with DuoClean PowerFins?
According to the care instructions provided by Shark, the pre-motor foam and felt filters should be rinsed every 3 months or as needed. The…
How do I assemble the Shark ZU60 Series Navigator Pet Pro Upright Vacuum?
To assemble the Shark ZU60 Series Navigator Pet Pro Upright Vacuum, follow these steps: 1. Ensure all parts are included in the package: Vacuum,…
How do I clean Shark AZ1002 Apex Powered Lift-Away Upright Vacuum filters with DuoClean?
To clean the filters on the Shark AZ1002 Apex Powered Lift-Away Upright Vacuum with DuoClean, follow these steps: 1. Regularly rinse and replace the…
How do I assemble the HOOVER Pet Max Complete Upright Vacuum?
To assemble the HOOVER Pet Max Complete Upright Vacuum, follow these steps: 1. Insert the wand into the spine until it clicks in place.…
How do I empty the dust cup on the Shark NV105 Navigator Light Upright Vacuum?
To empty the dust cup on the Shark NV105 Navigator Light Upright Vacuum, follow these steps: 1. Press the Dust Cup release button and…
How do I replace the battery on the ProTeam 107499 FreeFlex Battery Powered Upright Vacuum?
To replace the battery on the ProTeam 107499 FreeFlex Battery Powered Upright Vacuum, follow these steps: 1. Ensure the vacuum is turned off and…
How do I replace the odor cartridge in my Shark ZD550 Series Lift Away vacuum?
To replace the odor cartridge in your Shark ZD550 Series Lift Away vacuum, follow these steps: 1. F
How do I adjust the height setting on my BISSELL 3533 CleanView Upright Vacuum?
To adjust the height setting on your BISSELL 3533 CleanView Upright Vacuum, follow these steps: 1. Turn the dial on the foot of the…
How often should I clean the filters on my Shark NV341 Series Upright Vacuum?
According to the owner's manual, the recommended filter cleaning schedule for the Shark NV341 Series Upright Vacuum is as follows: - Foam filter: Every…
How do I clean the filters on my Shark Navigator Lift-Away Upright Vacuum?
To clean the filters on your Shark Navigator Lift-Away Upright Vacuum, follow these steps: 1. **Cleaning Pre-Motor Filters Every 3 Months:** - Remove the…