How do I put the MIANOVA LED Bluetooth Speaker into pairing mode for my iPhone?
To put your MIANOVA LED Bluetooth Speaker into pairing mode for your iPhone, follow these steps: Power On: Turn the speaker on. You should…
Manuals+ Q&A
LED questions & answers
Browse answered questions about LED, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhy is there a 2-minute delay before the speaker outputs sound, and is this normal?
A 2-minute delay before hearing sound is not normal for the Acoustic Audio AA15LBS. While most powered speakers have a brief protection circuit delay…
How can I fix a loose wire connection on my Tzumi Color Changing Light Strip?
Based on your description, there is a loose connection or a broken wire between the USB power cable and the LED strip. This is…
How do I troubleshoot a failed firmware installation on my Panasonic TX-50JX800B LED TV?
If your firmware update has failed, please try the following troubleshooting steps: Check Network Connection: Ensure your TV is connected to the internet via…
How do I set the time on the Equity by La Crosse 30228 LED Alarm Clock using the Hour, Min, and Time Set buttons?
To set the time on your Equity by La Crosse 30228 LED Alarm Clock using the buttons you described, please follow these steps: Press…
Can I add Amazon Prime to my Toshiba Fire TV?
Yes, you can use Amazon Prime on your Toshiba Fire TV. Since this TV uses the Fire TV operating system, Amazon Prime Video is…
Where can I find a repair center or check-up service for MoriMori LED Lantern Speakers in Hong Kong?
Based on the instruction manual for the MoriMori LED Lantern Speaker, there is no specific list of international repair centers provided. However, for users…
How do I disable the alarm on the USCCE Small LED Digital Alarm Clock?
To disable the alarm so it does not sound the following day, follow these steps based on the device's controls: Permanent Disable: Locate the…
Why is my SP110E device not appearing in the LED Hue app drop-down menu?
Since you have already tried power cycling and reinstalling the app, please check the following specific requirements for the KORJO SP110E: Bluetooth Pairing Method:…
Does the charging indicator light stay on or turn off when the RunningSnail radio is fully charged?
For the RunningSnail Emergency Hand Crank Radio, the charging indicator behavior depends on the charging method, but generally, the red charging light will remain…
How do I get the eARC port to work with my soundbar on a Toshiba Fire TV?
To enable eARC/ARC on your Toshiba Fire TV, please follow these troubleshooting steps: Check the Port: Ensure the HDMI cable is plugged into the…
Why is my NICREW light not coming on?
If your NICREW Slim LED Plants Light is not coming on, consider the following troubleshooting steps based on the manual: Check Power Connection: Ensure…
How do I connect external speakers to the Kogan 50 inch 4K UHD HDR LED TV (Series 8, JU8300)?
To connect external speakers to your Kogan 50" Series 8 JU8300 TV, you can use one of the following output ports located on the…
Why are the timer indicator lights turning green and blue on my White Crown QM019 LED Desk Lamp even when I haven't touched the timer settings?
The White Crown QM019 LED Desk Lamp features an auto-timer function with two specific settings: 30 minutes and 60 minutes. These are typically indicated…
How do I change the image orientation from vertical to horizontal on the Gzunelic M8 projector?
To change the orientation of the image (rotating or flipping) on the Gzunelic M8 projector, you typically need to access the Projection Mode settings.…
How do I change my Atomi Smart Spot Lights back to white light if they are stuck on a color?
To change your Atomi Smart Spot Lights back to white, you should use the Atomi Smart app. Within the app, select your device and…
How can I replace a lost remote for the Texsens MRD-BLYY003S LED Light Bulb, and is there a compatible app?
Based on the product manual for the Texsens MRD-BLYY003S, there is no dedicated app to control the light colors or settings; the device is…
Why won't my LED strip lights turn on?
If your PANGTON VILLA LED strip lights are not turning on, please check the following common troubleshooting steps: Check the Connection: Ensure the connection…
How do I get a replacement LED light for my ReVent RVL80 exhaust fan if it stopped working after a year?
To obtain a replacement for your ReVent RVL80 LED light, you should contact the manufacturer, GTR Technologies Inc., to initiate a warranty claim. While…
How do I connect my Insignia LED TV to the internet?
To connect your Insignia LED TV to the internet, follow these steps: 1. Plug the power cord into the back of your TV and…
How do I connect my Pioneer PN43951-22U 43-Inch Class LED 4K UHD Smart Fire TV to the internet?
To connect your Pioneer PN43951-22U 43-Inch Class LED 4K UHD Smart Fire TV to the internet, please follow these steps: 1. Plug the power…
How do I connect external devices to my LG LED TV?
To connect external devices to your LG LED TV, you can follow these steps: 1. Locate the HDMI ports on the back or side…
How do I connect my BAUHN H3 LED projector to my computer?
To connect your BAUHN H3 LED projector to your computer, please follow these steps: 1. Make sure both your projector and computer are turned…
How do I set the time and date on the Ivation LED Digital Time Bar?
To set the time and date on the Ivation LED Digital Time Bar, follow these steps: 1. Make sure the time bar is plugged…