Where can I get replacement screw #37 for the Bauer 1992E-B hammer drill?
According to the Parts List on page 14 of the manual, Part #37 is indeed a Screw (Quantity: 1). The assembly diagram on page…
Manuals+ Q&A
HEAVY DUTY questions & answers
Browse answered questions about HEAVY DUTY, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Does the Bauer 1992E-B hammer drill accept SDS bits?
No, the Bauer 1992E-B Reversible Hammer Drill does not accept SDS bits. According to the specifications on page 8 of the manual, this tool…
What is the maximum torque rating in ft-lbs for the Bauer 1992E-B Hammer Drill?
The owner's manual for the Bauer 1992E-B Reversible Hammer Drill does not list a specific maximum torque rating in ft-lbs or Nm. The provided…
My Bauer drill 1992E-B motor burned up after 5 months, and it's past the 3-month warranty. I'm dissatisfied with the product.
I'm sorry to hear that your Bauer Reversible Hammer Drill 1992E-B experienced a motor failure after only five months of ownership. The manual states…
How do I remove and replace the antenna on the Ion Audio Job Rocker Plus?
The official user manual for the Ion Audio Job Rocker Plus does not provide specific step-by-step instructions for internal repairs or antenna removal, as…
How do I turn on the backlight on the AstroAI ASITIRETRGA Heavy Duty Digital Gauge?
To turn on the backlight on the AstroAI ASITIRETRGA Heavy Duty Digital Gauge, simply press the power button (labeled as "ON/AUTO-OFF" button) once. The…
How do I load paper into the Victor 1240-3A calculator?
Loading paper into the Victor 1240-3A calculator is a simple process. Here are the step-by-step instructions: 1. Place the paper holder into position on…
How do I install the paper roll and replace the ribbon on the Monroe ClassicX Heavy-Duty Accounting Printing Calcu
Installing the Paper Roll: 1. Open the printer compartment cover located at the back of the calculator. 2. Take the Monroe 20lb. bond starter…
How do I change the ribbon cartridge in the Monroe 8130X calculator?
To change the ribbon cartridge in the Monroe 8130X calculator, follow these steps: Step 1: Turn OFF the calculator. Step 2: Remove the printer…
How do I change the language on the Pyramid 3700 Heavy-Duty Time Clock?
To change the language on the Pyramid 3700 Heavy-Duty Time Clock, follow these steps: 1. Press the SELECT button until the "LANG=ENGLISH" feature is…
How do I load paper into the Victor 1460-4 calculator?
To load paper into the Victor 1460-4 calculator, please follow these steps: 1. Set the "NP/P/IP" switch to the NP position. 2. Place the…
Can the UMI 1200W Heavy Duty Power Converter be used in countries with different voltage standards?
Yes, the UMI 1200W Heavy Duty Power Converter is designed to overcome the constraints imposed by different voltage standards used in different countries. It…
How do I charge the VIPERTEK VTS-T03 Heavy Duty Stun Gun?
To charge the VIPERTEK VTS-T03 Heavy Duty Stun Gun, follow these steps: 1. Press down and slide the button on the bottom of the…
How do I connect the GSPSCN Heavy Duty Portable Tire Inflator to my car battery?
Connecting the GSPSCN Heavy Duty Portable Tire Inflator to your car battery is a straightforward process. Here are the step-by-step instructions: 1. Locate the…
How do I adjust the pressure on the YOTOO 102003 Heavy Duty Air Compressor?
To adjust the pressure on the YOTOO 102003 Heavy Duty Air Compressor, please follow these steps: 1. Locate the pressure regulator dial on the…
How do I check the tire pressure using the AstroAI 756910382155 Heavy Duty DIGITAL GAUGE?
To check the tire pressure using the AstroAI 756910382155 Heavy Duty DIGITAL GAUGE, follow these steps: 1. Press the "ON/AUTO-OFF" button on the gauge…
How do I calibrate the Vondior 100 PSI Heavy Duty Air Pressure Gauge?
Calibrating the Vondior 100 PSI Heavy Duty Air Pressure Gauge is an important step to ensure accurate readings. Here are the steps to calibrate…
How do I use the AZUNO TIG200D 200 PSI Heavy Duty Air Compressor to inflate my tires?
To use the AZUNO TIG200D 200 PSI Heavy Duty Air Compressor for tire inflation, follow these steps: 1. Ensure the compressor is placed on…
How do I calibrate the TireTek TT-GH10-A04-BR2 Heavy Duty Dual Head Tire Gauge?
Calibrating the TireTek TT-GH10-A04-BR2 Heavy Duty Dual Head Tire Gauge is a simple process. Here are the steps to calibrate the gauge: 1. Prepare…
How do I use the Rhino USA RGAUG-060 Heavy Duty Tire Pressure Gauge?
To use the Rhino USA RGAUG-060 Heavy Duty Tire Pressure Gauge, follow these steps: 1. Remove the valve stem cap from the tire you…
How do I load staples into the DeWalt DWHT75021 Heavy Duty Electric Stapler?
To load staples into the DeWalt DWHT75021 Heavy Duty Electric Stapler, follow these steps: 1. Unplug the tool and ensure the on/off switch is…
How do I use the AWBLIN NS-837 Heavy Duty Light Tester to check the voltage in my car's electric
To use the AWBLIN NS-837 Heavy Duty Light Tester to check the voltage in your car's electrical system, follow these steps: 1. Unpack the…
How do I use the Lisle 28400 Heavy Duty Tester to test a low-voltage circuit?
To use the Lisle 28400 Heavy Duty Tester to test a low-voltage circuit, follow these step-by-step instructions: 1. Unpack the Tester: Carefully remove the…
How do I assemble the McCulloch MC1275 Heavy-Duty Steam Cleaner?
To assemble the McCulloch MC1275 Heavy-Duty Steam Cleaner, follow these steps: 1. Start by selecting one of the extension wands. Insert the end of…