How do I pair my Dish 54.0 remote with a DVD player?
The Dish 54.0 remote uses an on-screen pairing wizard rather than manual code entry. To pair your remote with a DVD player or other…
Manuals+ Q&A
Dish 54.0 Remote Control for the Hopper: User Manual & TV Codes — questions & answers
Read product questions and troubleshooting answers linked to Dish 54.0 Remote Control for the Hopper: User Manual & TV Codes.
Browse topics
Answered questions
How do I program the Dish 54.0 remote to an Insignia TV and what are the codes?
To program your Dish 54.0 remote to an Insignia TV, you do not need to manually enter a 4-digit code. The 54.0 remote uses…
How do I enter a dash for a channel number on the Dish 54.0 remote?
To enter a dash for a channel number on the Dish 54.0 remote control, you should use the Star (*) button located at the…
How do I perform frame-by-frame playback on the Dish 54.0 remote?
To perform frame-by-frame playback using the Dish 54.0 remote, follow these steps while watching a recorded program or live TV that has been paused:…
Where is the record button on the Dish 54.0 remote?
The Dish 54.0 remote does not have a single dedicated button labeled "Record." Instead, you can record programs using the following methods: Voice Command:…
How can I turn off the TV without putting the Hopper into standby mode using the Dish 54.0 remote?
To turn off your TV without putting your Hopper receiver into standby mode using the Dish 54.0 remote, you should use the TV mode…
Do you have a TV guide for the Dish 54.0 remote control?
The Dish 54.0 remote control allows you to access the TV guide directly using the Guide button located on the top right of the…
Do you have a Dish 54.0 remote control manual?
Yes, the manual for the Dish 54.0 Remote Control is available on this page. You can find detailed instructions for setup, pairing, and troubleshooting…
How do I scroll the program guide by week on the Dish 54.0 remote?
To scroll through the program guide in larger time increments using your Dish 54.0 Remote, use the following buttons while the Guide is open:…
How do I program my Dish 54.0 remote control?
To program your Dish 54.0 remote control, please follow these steps: 1. Press the home button twice on the remote control. 2. Select "Settings"…