Why does my DepthTrax DT2B display three dashes continuously?
If your HawkEye DT2B continues to display "---", it means the sonar is not receiving a return signal from the bottom. According to the…
Manuals+ Q&A
HawkEye DT2B DepthTrax-Complete Features/Instruction Guide — questions & answers
Read product questions and troubleshooting answers linked to HawkEye DT2B DepthTrax-Complete Features/Instruction Guide.
Browse topics
Answered questions
Why is the system attempting to install software on my computer for the HawkEye DT2B?
The HawkEye DT2B DepthTrax is a standalone marine depth sounder designed for in-dash installation on a vessel. According to the product manual, it does…
How do I permanently turn off the alarm buzzer on the HawkEye DT2B?
The HawkEye DT2B does not have a single "master off" switch for the buzzer, but you can effectively disable the alarms by setting their…
How do I set the shallow water alarm on the HawkEye DT2B DepthTrax?
To set the shallow water alarm on the HawkEye DT2B DepthTrax, follow these steps: 1. Make sure you are in the "Depth Sounder" mode…