How do I wire the Lutron MS-OPS2 if I have two black wires and one red wire in the wall box?
The Lutron MS-OPS2 is designed for single-pole applications. If you see two black wires and a red wire in your wall box, you are…
Read product questions and troubleshooting answers linked to Lutron Motion Sensor Switch Manual: MS-OPS2 Instruction Guide.
The Lutron MS-OPS2 is designed for single-pole applications. If you see two black wires and a red wire in your wall box, you are…
The plain metal wire you are referring to is likely the bare copper ground wire. According to the manual for the Lutron MS-OPS2, a…