What does the Err2 error code mean on the Berrcom Infrared Thermometer and how can it be fixed?
Based on the Berrcom JXB-178 manual, the Err2 (or "Err") message typically indicates a hardware malfunction or that the device is operating outside of…
Manuals+ Q&A
Berrcom Infrared Thermometer User Guide — questions & answers
Read product questions and troubleshooting answers linked to Berrcom Infrared Thermometer User Guide.
Browse topics
Answered questions
Is the lens critical for the Berrcom JXB-178 thermometer and can it be replaced?
The lens (often referred to as the infrared sensor window) is critical to the operation of the Berrcom JXB-178. This component is responsible for…
How do I change the temperature unit from Celsius to Fahrenheit on the Berrcom JXB-178 thermometer?
To fix the temperature unit display on your Berrcom JXB-178, follow these steps to toggle the setting: Turn the thermometer ON. Press and hold…
How do I fix the 'HI' and 'HL' error messages on my Berrcom Infrared Thermometer?
According to the Berrcom JXB-178 manual, the HI message typically appears when the temperature reading exceeds the device's measurement range or when environmental factors…
Why won't my Berrcom thermometer turn on after inserting the batteries?
If your Berrcom JXB-178 thermometer will not turn on after inserting the batteries, please check the following: Battery Orientation: Open the lid on the…
Is the Berrcom thermometer only accurate when scanning the center of the forehead, and why is there a difference between the forehead and temple?
According to the Berrcom JXB-178 Quick Start Guide, the thermometer is designed to be positioned specifically between 1.2" to 2" (3 to 5 cm)…
Why won't my Berrcom thermometer turn on after changing the batteries, and is there a specific button combination to start it?
To turn on the Berrcom JXB-178 thermometer, you simply need to press the ON/SCAN button. There is no special button combination required for power-up.…
Why does my Berrcom thermometer only display 'LO' in Body mode even after recalibration and battery changes?
The "LO" message on your Berrcom JXB-178 thermometer indicates that the temperature being measured is below the Body mode range (89.6°F to 109.2°F /…
Why does the thermometer give me error 1?
While the provided Quick Start Guide for the Berrcom JXB-178 does not explicitly list a numerical "Error 1," it does detail common error states…