Why are the Y and Z axes not moving and the X axis stopping after 10-15mm on my TTC450 Pro?
Based on the troubleshooting guide for the Two Trees TTC450 Pro, your symptoms suggest a motor or wiring issue. Please follow these steps to…
Manuals+ Q&A
TWO TREES TTC450 Pro CNC Router Machine Instruction Manual — questions & answers
Read product questions and troubleshooting answers linked to TWO TREES TTC450 Pro CNC Router Machine Instruction Manual.
Browse topics
Answered questions
I have a Two Trees TTC-450 CNC machine.
It appears you are identifying your machine as the Two Trees TTC-450. This manual specifically covers the TTC450 Pro model. While many operations are…
Why does my Two Trees TTC450 Pro CNC router not turn off when using the power switch, requiring me to unplug it?
If your Two Trees TTC450 Pro does not turn off via the standard controls, please check the following based on the product manual and…
How do I connect the 500W spindle motor to the TTC450 Pro?
To connect the 500W spindle motor to your Two Trees TTC450 Pro, follow these steps based on the product manual: Identify the Ports: On…