Manuals+ Q&A

MICRODOS MP2SP-SPEEDY-PH Multi Peristaltic Dosing Pump Instruction Manual — questions & answers

Read product questions and troubleshooting answers linked to MICRODOS MP2SP-SPEEDY-PH Multi Peristaltic Dosing Pump Instruction Manual.

Open manual Ask a question

Browse topics

Answered questions

When I press the set button for 3 seconds, I see the set value. By pressing the set button, the value increases, up to 99 for RX. What does this 99 mean and how can I lower it again?

2026-07-19 1 answer

The provided manual for the MICRODOS MP2SP-SPEEDY-PH Multi Peristaltic Dosing Pump primarily discusses pH settings and calibration, with setpoint values ranging from 6.0 to…

Related manual Product Q&A

Is it normal for the AL LED to turn on when the pH dosing pump is running?

2026-05-29 1 answer

According to the manual for the MICRODOS MP2SP-SPEEDY-PH, the "AL" LED is an alarm indicator. It is not normal for this LED to be…

Related manual Product Q&A

Why is my Microdos MP2SP-SPEEDY-PH dosing pump not priming even with a new tube?

2026-05-08 1 answer

If your MICRODOS MP2SP-SPEEDY-PH peristaltic pump is not priming despite having a new internal tube, please check the following common causes and solutions: Check…

Related manual Product Q&A