Universal TV Remote RC-G008+ Universal Remote Control Instructions — questions & answers

To program the RC-G008 universal remote for an Edenwood ED32A16HD-RE (32-inch VIDAA) TV, follow these steps as confirmed by user testing: Press and hold…

The Lenco brand is not explicitly listed in the code table for the RC-G008+ remote. Because there is no specific code, you should use…

Based on the layout of the RC-G008+ universal remote, there is no dedicated button labeled "TEXT" or "Teletext." On many universal remotes of this…

The RC-G008+ universal remote is compatible with ONN TVs. According to the manual's code list, the specific 3-digit code for ONN is 164. To…

According to the RC-G008+ manual, the only specific 3-digit code listed for RCA is 019. However, if that code does not work for your…

When a universal remote enters double digits for a single press, it is often due to a code mismatch where the TV is misinterpreting…

To set up your RC-G008+ remote for RCA or Roku devices, you can try the following methods based on the manual: Method 1: Brand…

If you have already tried the standard setup methods for your RC-G008+ and an Emerson TV without success, please try the following specific steps…

It is common for a universal remote to accept a code that only partially matches your TV model, which results in the LED turning…

The provided manual for the RC-G008 remote control does not list NEOS as a brand in its code list or brand search section. Therefore,…

The provided code list for the RC-G008+ Universal Remote does not explicitly list "Dahua" as a supported brand. However, you can still set up…

The Dahua brand is not explicitly listed in the code table for the RC-G008+ remote. To pair your Dahua DHI-LTV 43-SD400, you should use…

The brand LISTO is not explicitly listed in the code table for the RC-G008+ universal remote. However, you can still pair your TV using…

Since the remote works on your Samsung TV, the device is functional. For Haier TVs, there are three specific methods you can try to…

The Proline brand is not explicitly listed in the code table for the RC-G008+ remote. However, because this is a universal remote, you can…

If the manual codes for the RC-G008+ are not working, please try the following troubleshooting steps: Try Automatic Search: Press and hold [MUTE] +…

Since you have already tried the standard Automatic Search and the codes listed in the manual without success, there are two additional methods you…

The Engel brand is not explicitly listed in the code table for the RC-G008+ remote. However, you can still attempt to pair it using…

Based on the provided manual for the RC-G008+ Universal Remote Control, this device does not support a "learning" function to copy signals directly from…

On the RC-G008+ Universal Remote, the colored buttons (Red, Green, Yellow, and Blue) serve two primary purposes depending on whether you are in setup…

If your RC-G008+ remote lights up but does not control your TV, it is likely that the specific code used was incorrect or the…

If your RC-G008+ remote is only controlling analog functions or stuck on an analog input, it is likely that the current code is not…

Since TD-Systems is not listed in the specific code table for the RC-G008, and the automatic search has failed, you should try the following…

The brand Hannspree is not explicitly listed in the code table for the RC-G008+ remote. Because this brand is missing from the list, you…