Where can I purchase replacement round sponge filters for the KIPMAX X20 vacuum?
To purchase replacement filters for your KIPMAX X20 Cordless Vacuum Cleaner, it is recommended to contact the manufacturer directly as specific retail links for…
Manuals+ Q&A
Vacuum Cleaner questions & answers
Browse answered questions about Vacuum Cleaner, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Where are the anti-drop sensors located on the DEEBOT OZMO T8 and how should they be maintained?
The Anti-Drop Sensors are critical safety components located on the bottom of your DEEBOT OZMO T8. They prevent the robot from falling over edges…
How do I use the blowing function on the SUITU ST-6711APlus?
To use the blowing function (Blowing Mode) on your SUITU ST-6711APlus, follow these steps based on the manual's installation instructions: Locate the Air Outlet:…
How do I fix an E1 error on the Hoover HFX cordless vacuum when the brush head is clear but the error persists?
The E1 error code on the Hoover HFX indicates an obstruction in the nozzle or a technical issue with the motor. If you have…
How do I fix the E1 error on my Hoover HFX vacuum?
According to the Hoover HFX manual, the E1 error code indicates an obstruction in the nozzle or a technical issue with the motor. Since…
Can I purchase a replacement charger for the BUTURE JR600 if the cord is broken?
According to the BUTURE JR600 manual, the supply cord for the charger cannot be replaced. If the cord is damaged, the entire charger must…
Why is the roller drying function not activating?
The Dyson Spot+Scrub Ai features an Automatic roller drying system that hygienically dries the wet roller using 45°C hot air while the robot is…
What is the cleaning range of the Eureka J15 Evo Ultra from its base station?
The instruction manual for the Eureka J15 Evo Ultra does not specify a maximum distance or numerical range limit from the base station for…
How do I clean the filter in the VACSERVICE N8 motor unit?
To clean the filter in the main motor of your VACSERVICE N8, follow these steps from the maintenance guide: Access the Filter: Hold the…
Where can I order a replacement B5 coarse filter for my Nedis VCBS250GY bagless vacuum cleaner?
To order a replacement B5 coarse dust filter for your Nedis VCBS250GY vacuum cleaner, you should contact the manufacturer or an authorized parts distributor.…
Where can I find the coarse dust filter for the Nedis VCBS250GY bagless vacuum cleaner?
For the Nedis VCBS250GY bagless vacuum cleaner, the coarse dust filter (referred to in the German manual as the Grobstaubfilter) is identified as part…
Does Rowenta offer a 15-year warranty for battery replacement after two years of use?
Rowenta offers a 15-year repairability commitment (Riparabile al giusto prezzo 15 anni) for the X-Pert 7.60. This means that Rowenta commits to keeping spare…
How to repair the vacuum if the pump and motor are making noise
Based on the Nilfisk CTS22 Owner's Manual, unusual or acute noise from the vacuum unit is typically a sign of a specific operational issue…
How do I turn off the child lock on the Roborock Qrevo Edge?
To turn off the Child Lock on your Roborock Qrevo Edge Series vacuum, you can use the following methods: Using the App: Open the…
The vacuum cleaner does not recognize that the handle is unlocked and will not start.
Based on the Roborock Flexi manual, the vacuum cleaner is designed to only operate when the cleaning head is unlocked. If the device is…
Why is my vacuum cleaner showing an E8 error code and failing to charge?
The instruction manual for the FABER FVC X-CYCLONE 151 does not explicitly list an "E8" error code in its troubleshooting table. However, based on…
Why is my Faber FVC X-CYCLONE 151 vacuum not charging and showing a light code?
Based on the manual for the FABER FVC X-CYCLONE 151, if your vacuum is not charging correctly, please follow these troubleshooting steps: Check Connections:…
How do I clean the fine dust filter and the vacuum filter?
To clean the filters on your UMLo V11 Cordless Vacuum Cleaner, follow these steps based on the manual's maintenance guide: Disassembly: Detach the main…
Why do I need to connect to the app to change the robot's language?
For the ECOVACS T50 OMNI Gen2, advanced settings such as voice language, firmware updates, and cleaning schedules are managed through the ECOVACS HOME App.…
Why are the power button and suction level indicators flashing simultaneously on my NADALY N16 vacuum, and why won't it turn on?
Based on the NADALY N16 manual, there are a few specific conditions that cause the display indicators to flash or alarm: Wrong Adapter Alarm:…
Why does my vacuum cleaner only last 15 minutes after a full charge and lack suction power?
Based on the VACUSTICK HY-118 manual, here are the steps to address battery and suction issues: Charging: The manual specifies a charging time of…
How do I replace the battery on the 360 S8 robot vacuum?
The user manual for the 360 S8 Robot Vacuum Cleaner does not provide a step-by-step guide for user-performed battery replacement. However, it contains the…
Do I always need to put water in the robot? Can I vacuum without water? Why is the dustbin empty while debris accumulates on the robot itself?
Based on the manual for the Sulfar BR151 (also referred to as BR150), here is the guidance for your questions: Vacuuming without water: Yes,…
Can the Eureka NER700 robotic vacuum be operated without the app?
Yes, you can operate the Eureka NER700 Series robotic vacuum without using the mobile application. The vacuum features physical buttons on the unit for…