How can I stop interference between two smart dimmers on the same circuit?
The issue you are describing is likely caused by electrical noise or a wiring configuration conflict. Treatlife smart dimmers are designed for single-pole use…
Manuals+ Q&A
Smart Dimmer questions & answers
Browse answered questions about Smart Dimmer, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How can I control the JASCO ZWN3109 Pro Series Plug-in Smart Dimmer with Google Assistant?
The JASCO ZWN3109 Pro Series Plug-in Smart Dimmer uses Z-Wave Plus technology. Unlike Wi-Fi devices (such as Globe or Geeni) that connect directly to…
How do I connect the TREATLIFE DS01-4 Smart Dimmer Light Switch to my Wi-Fi network?
To connect the TREATLIFE DS01-4 Smart Dimmer Light Switch to your Wi-Fi network, please follow these steps: 1. Make sure the switch is connected…
How do I install and set up the TREATLIFE DS01C Smart Dimmer Switch?
To install and set up the TREATLIFE DS01C Smart Dimmer Switch, please follow the steps outlined in the user manual. Here is a complete…
Can I use the GE Lighting 93120079 Smart Dimmer Light Switch with a ceiling fan?
No, the GE Lighting 93120079 Smart Dimmer Light Switch is not compatible with ceiling fans. It is designed to work with traditional light bulbs,…
How do I install the GE CSWDMOCBWF1/ST1P CYNC Smart Dimmer Light Switch in a 3-way wiring setup?
To install the GE CSWDMOCBWF1/ST1P CYNC Smart Dimmer Light Switch in a 3-way wiring setup, follow these step-by-step instructions: 1. Turn off the power:…
Can this Leviton Decora Smart Dimmer be installed in a 3-way switch configuration?
Yes, you can install the Leviton Decora Smart Dimmer in a 3-way switch configuration. However, you will need to purchase the Leviton Companion Switch…
How do I install the KASTA-1BMBH-W Smart Dimmer Mechanism?
The KASTA-1BMBH-W Smart Dimmer Mechanism should be installed by a licensed electrician in accordance with AS/NZS 3000 and other relevant standards and regulations. Before…
How do I reset the BN-LINK Smart Dimmer Plug to its factory settings?
To reset the BN-LINK Smart Dimmer Plug to its factory settings, follow these steps: 1. Ensure that the plug is plugged in and powered…
How do I troubleshoot if the lights connected to the GE Lighting PC93130603 Smart Dimmer 4 Wire Switches?
If the lights connected to the GE Lighting PC93130603 Smart Dimmer 4 Wire Switches do not turn on after installation, here are some troubleshooting…