Can the 386C distance function be changed to show three decimal places?
Based on the available manual for the SY Wireless Bicycle Speedometer (Model 386C), there is no setting to change the number of decimal places…
Manuals+ Q&A
SY questions & answers
Browse answered questions about SY, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I disassemble an IKEA SY sewing machine?
The IKEA SY sewing machine manual does not provide specific instructions for full disassembly, as this is generally intended for authorized service technicians. However,…
Why is my SY Bicycle Speedometer not registering speed or clicking when I pass the magnet by the sensor, even after changing the batteries?
If your SY Bicycle Speedometer is not registering speed or making a clicking sound when the magnet passes the sensor, please check the following…
How do I set up my SY 386C Bicycle Speedometer after changing the battery, and what 4-digit tire size code should I use for a 26-inch bike?
To set up your SY 386C Bicycle Speedometer after a battery change, you must first enter the wheel circumference as a 4-digit number. This…
How do I manually enter the odometer (total distance) reading after a battery change?
To enter your previous kilometer reading (odometer) after a battery change on the SY Wireless Bicycle Speedometer, follow these steps: Reset the device: When…
Why is my speedometer display showing but not changing, and could it be the sensor battery?
Yes, a dead or weak battery in the sensor is a common cause for the display showing data but not updating speed or distance.…
How do I set up the SY Wireless Bicycle Speedometer and Odometer?
To set up the SY Wireless Bicycle Speedometer and Odometer, follow these steps: 1. Open the electromagnetic cover and insert the battery. 2. Mount…
How to properly clean and maintain the TV to ensure its longevity and performance?
**Cleaning and Maintenance Instructions:** 1. **Cleaning the TV:** - Before cleaning, disconnect the television set from the power source. - Use a soft damp…