What is the highest graphics card supported by the Thermaltake 500W TR2 Bronze power supply?
The Thermaltake 500W TR2 Bronze power supply provides a maximum output of 500W, with 41.67A available on the +12V rail (totaling 500W for that…
Manuals+ Q&A
Power Supply questions & answers
Browse answered questions about Power Supply, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Why is there no output voltage even though the display is on?
If your LOGNWEI PS-3010DF display is on but there is no output voltage, please check the following settings based on the instruction manual: Check…
Can the SHANQIU FX 5-12Pro-AC Mini UPS be kept permanently connected to the 220V mains, or should it be disconnected when fully charged?
Yes, the SHANQIU FX 5-12Pro-AC Mini UPS is designed to be kept permanently connected to the AC power supply (100-240V). You do not need…
Can the charging time be reduced?
Based on the manual for the Flowatt FLW-PT250W, there are no specific instructions for "fast charging" beyond the standard methods provided. However, you can…
Should I change the input voltage switch from 240V to 115V for use in Japan (100V), and how do I move it if it seems stuck?
For use in Japan, where the standard outlet voltage is 100V, you must change the input selection switch to the 115V position. According to…
Can the Lineo5 power supply simultaneously power the Rivo Plus and the Preciso DAC?
Based on the Volumio Lineo5 User Manual, the device provides a single DC Output Bi-polar Connector with a maximum output of 5V/5A. The manual…
What are the input and output voltage specifications for the 3kVA UPS model?
Based on the technical specifications for the 3kVA (3000VA) On-Line UPS, the standard voltage parameters are as follows: Input Voltage: The unit accepts a…
Where can I find a schematic diagram for troubleshooting a WANPTEK NPS306W that is blowing fuses?
The official user manual for the WANPTEK NPS306W does not include a schematic diagram. For internal repairs and circuit diagrams, you should contact the…
Where can I find a schematic diagram for the WANPTEK NPS306W to troubleshoot blown fuses?
The provided user manual for the WANPTEK NPS306W does not include a full schematic diagram. However, it does provide the following information regarding fuse…
How do I correctly connect the V-TAC 26400 power supply if the diagram on the lid does not match the terminal block markings?
For the V-TAC 26400 (SKU 3265) Rainproof Power Supply, you should follow the standard terminal block markings and the connection diagram provided in the…
How do I charge a 21700 40T battery using the PS-3010DF power supply?
To charge a battery like a 21700 40T using the LONGWEI PS-3010DF, you must use a Constant Current/Constant Voltage (CC/CV) charging method. Warning: Charging…
Where can I find electronic diagrams and spare parts for the PULS DIMENSION QS20.241 power supply?
Regarding your request for electronic diagrams and spare parts for the PULS DIMENSION QS20.241, please note the following information from the official instruction manual:…
Why is my power supply not keeping a charge, and will replacing the original battery with a LiFePO4 battery work?
The Global Industrial 436981 is specifically designed to use a 12V Lead-Acid battery. Replacing the original battery with a LiFePO4 (Lithium Iron Phosphate) battery…
Why is my Global Industrial 436981 power supply having trouble keeping a charge?
If your Global Industrial 436981 power supply is not keeping a charge, it may be due to battery health, storage habits, or environmental factors.…
How do I reset the Korad KA3005DS power supply?
The Korad KA3005DS manual does not specify a dedicated "factory reset" button. However, you can manually clear or change settings using the following methods:…
Why is LED indicator 1 staying on even when no cable is plugged in?
According to the LED INDICATORS section of the Valeton VPS-6 manual, the LED is designed to illuminate red only when a pedal cable is…
How do I connect CN1, CN2, and CN3 on the RSP-1500, and why is there no output voltage?
If your MEAN WELL RSP-1500 is not producing output voltage, it is likely because the Remote ON-OFF function is not configured correctly. By default,…
How do I use the Korad KA3000/6000 for battery charging, and what do the display readings mean?
Based on the Korad KA3000-6000 Series manual, here is guidance for your questions: Display Meanings: The top display (labeled 'V') shows the Voltage level,…
What is the lifespan of this model SURT10000?
The provided manual for the APC SURT1000 Smart-UPS RT Uninterruptible Power Supply states that UPS battery life differs based on usage and environment. It…
My Seasonic Focus GX ATX 3 1000W power supply's hybrid mode is not working, and the fan is always spinning. I change modes when the computer is off. I have a Ryzen 7 9800x3d and an RTX 5070 Ti.
If your Seasonic Focus GX ATX 3 1000W power supply's hybrid mode is not working and the fan is always spinning, please follow these…
Where can I find the electrical schematic diagram for the Wanptek DPS series power supply for repair purposes?
The provided user manual for the Wanptek DPS Series DC Power Supply does not include internal electrical schematic diagrams or circuit board layouts. Manufacturers…
What is the availability of the Altronix OLS200220 power supply?
Manuals+ is a provider of product manuals and technical documentation and does not sell or maintain stock of Altronix hardware. To check the availability…
The power supply light (Basic 230V) flashes constantly even without the blue cable connected. Can this be fixed?
A constantly blinking light on the Maytronics Dolphin power supply usually indicates a communication error or a hardware fault. Since the light continues to…
How can I download the manual in Spanish?
Currently, the manual provided on this page is the English version. To obtain the manual in Spanish, you can try the following steps: Official…