Why is my COWSAR HZB-15N ice maker making loud sounds and leaking water?
Based on the troubleshooting guide for the COWSAR HZB-15N, here are the steps to address your issues: For Water Leakage: Check the Drain Plug:…
Manuals+ Q&A
Nugget Ice Maker questions & answers
Browse answered questions about Nugget Ice Maker, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Why is my ice coming out from the top of the machine? The metal part that spins keeps shooting out into the ice bucket and the white cover that goes over that keeps popping off.
The behavior you're describing, with ice coming out from the top of the machine and internal parts like the metal spinning component and its…
For the Brio 740i, IMCT740ISC Countertop Nugget Ice Maker, where is the best place to buy citric acid crystals, how much should be used, and can white vinegar be used as a substitute?
The provided manual for the Brio 740i, IMCT740ISC Countertop Nugget Ice Maker does not specify where to purchase citric acid crystals, the recommended amount…
What does it mean when the power light is flashing on my Brio 740i ice maker?
According to the troubleshooting guide for the Brio 740i (IMCT740ISC), if the Power and Ice indicators are both flashing, it typically indicates that the…
What does it mean when the power light is flashing on my Brio 740i ice maker?
According to the troubleshooting guide for the Brio 740i (IMCT740ISC), if the Power and Ice indicators are flashing simultaneously, it indicates that the ambient…
How do I change the water filter on the GE UNC15NPWII Gourmet Nugget Ice Maker?
Based on the product specifications for the GE UNC15NPWII, this unit uses an Inline (GSWF) water filter. While the specific physical location can vary…
My ice maker makes a small amount of ice then stops making ice. Bin will not even be 1/4 full not a year old yet. Vents are clear.
It sounds like your AGLUCKY HZB-20BN Portable Nugget Ice Maker is experiencing an issue where it stops producing ice prematurely. Since you've already checked…
How do I connect the Hothope WQJR25 ice maker to a water jug?
Based on the instruction manual for the Hothope WQJR25, the unit is primarily designed to be connected directly to a tap water source rather…
Where is the reset button located on the THEREYE ER-IM03 ice maker?
Based on the user manual for the THEREYE ER-IM03, there is no dedicated physical "reset" button on the exterior or interior of the unit.…
How can I contact AGLUCKY for warranty support regarding a noisy HZB-20BN ice maker?
The manual for the AGLUCKY HZB-20BN indicates that the manufacturer provides a warranty for a minimum of 1 year from the date of purchase,…
How do I repair an AGLUCKY HZB-20BN ice maker that has stopped making ice, has a loose float switch, and is leaking water from the back bottom?
Based on the AGLUCKY HZB-20BN manual, here are the troubleshooting steps for the issues you described: Water Leakage: The manual suggests checking if the…
Why is my Thereye ER-IM03 ice maker switching between 'on' and 'clean' modes and making loud noises after cleaning?
Based on the Thereye ER-IM03 manual, here are some troubleshooting steps and considerations for the issues you are experiencing: Loud Noises: The manual notes…
How can I replace the water drain cap for the Frigidaire EFIC239 ice maker?
The user manual for the Frigidaire EFIC239 identifies the water drain cap as a removable part located at the front bottom side of the…
My Thereye ER-IM05 ice maker is not working even after cleaning and troubleshooting. How can I get support?
We are sorry to hear that your Thereye ER-IM05 ice maker is still not functioning after your troubleshooting efforts. As Manuals+ is a repository…
Why has my THEREYE ER-IM03 ice maker stopped making ice after 6 months of use?
Since your THEREYE ER-IM03 has stopped making ice after 6 months, you should first check the following troubleshooting steps from the manual: Check the…
Why does my Thereye ER-IM03 stop making ice and enter clean mode continuously?
If your Thereye ER-IM03 is stuck in a continuous cleaning cycle, it is likely not a specific "setting" but rather a triggered state or…
What does a flashing 'F' error code mean on the AGLUCKY HZB-20BN ice maker, and what is the expected lifespan?
The flashing 'F' error code on your AGLUCKY HZB-20BN typically indicates a water flow or sensor failure. This often occurs when the water pump…
Why is my ice maker producing shaved ice instead of nugget ice?
If your Brio 740i is producing ice that resembles shaved ice rather than firm nuggets, it is often related to temperature or mineral buildup.…
Why does my ice maker indicate 'ICE FULL' when the drawer is empty and there is plenty of water?
If your hOmeLabs Nugget Ice Maker is incorrectly showing the ICE FULL indicator when the drawer is empty, it is likely due to an…
Why is the 'Add Water' light flashing on my Oraimo OIM-211A ice maker when the tank is full?
If the Add Water indicator (water drop icon) continues to flash even when the tank is full, the device's sensors may be blocked or…
How do I stop the THEREYE ER-IM03 ice maker from being stuck in cleaning mode?
To exit or stop the self-cleaning mode on your THEREYE ER-IM03, you can try the following steps based on the manual's instructions: Press the…
Why is my Brio 740i ice maker making a loud, unusual noise during operation?
Based on the Brio 740i manual, unusual noises are often related to mineral buildup or initial startup. Here are the steps to address the…
Where can I find an exploded diagram and parts list for the Oraimo OIM-211A ice maker to repair a condenser fan?
The provided manual for the Oraimo OIM-512A (and similar models like your OIM-211A) does not include a detailed exploded diagram or a wiring schematic.…
Where can I purchase replacement parts for the HUMHOLD HDZB-15B1 ice maker?
The user manual for the HUMHOLD HDZB-15B1 does not provide a direct link to a parts store or a specific list of part numbers…