Can the pressure gauge assembly of the Metabo HWW 4000/25 G be attached to any standard commercial water tank?
Whether the pressure gauge and switch assembly from the Metabo HWW 4000/25 G can be attached to any commercial tank depends on the thread…
Manuals+ Q&A
Metabo questions & answers
Browse answered questions about Metabo, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Can an 8mm collet be used with the Metabo FM 500-6 trim router?
Based on the instruction manual for the Metabo FM 500-6, the standard collet size is 6mm (as indicated by the model name and technical…
Where is the serial number located on the Metabo KGS 216 M mitre saw?
Pour trouver le numro de srie de votre scie onglet Metabo KGS 216 M, vous devez chercher la plaque signaltique (type plate) fixe sur…
How do I adjust the belt tension and tracking on the Metabo BAE 75 belt sander?
On the Metabo BAE 75, the belt tension is automatically set by a spring-loaded mechanism and is not manually adjustable beyond the tensioning lever.…
How do I restart the Metabo BAS 261 band saw after the stop mechanism has been activated?
If your Metabo BAS 261 Precision Band Saw will not start after being stopped, it is likely due to one of its built-in safety…
Where can I find the electrical diagram for spare part 34 306 805 for the Metabo HG 2000/2 heat gun?
The instruction manual for the Metabo HG series does not include internal electrical wiring diagrams or schematics for specific spare parts. According to the…
This is not a cordless drill, it's a cordless jigsaw.
You are absolutely correct! The Metabo ST 18 L 90 is indeed a cordless jigsaw, not a cordless drill. The manual provided on Manuals+…
Are chargers available for the Metabo BS 18 L BL cordless drill?
Yes, chargers are available for the Metabo BS 18 L BL. According to the manual's accessories section, the drill is compatible with original Metabo…
Why is my Metabo ASC 145 SE charger not charging a battery that was dropped in water and then dried?
Based on the Metabo ASC 145 SE instruction manual and safety guidelines, there are several critical reasons why your battery is not charging after…
Why can't I tune to BBC Radio 4 on DAB, and why does the radio say the list is full?
Based on the manual for the Metabo R 12-18 BT / DAB+BT, here are the steps to resolve DAB tuning issues and the "list…
Why is my Metabo HPT KC18DEXQB Driver Drill Combo Kit not powering on?
If your Metabo HPT KC18DEXQB Driver Drill Combo Kit is not powering on, there are a few possible causes and troubleshooting steps you can…
How do I adjust the depth of the nails with the Metabo HPT NR90AES1 Framing Nailer?
To adjust the depth of the nails with the Metabo HPT NR90AES1 Framing Nailer, follow these steps: 1. Disconnect the nailer from the air…
How do I clean the pleated filter of the Metabo ASA 25 L PC All-Purpose Vacuum Cleaner?
To clean the pleated filter, follow these steps: 1. Press the button labeled "PressClean" (4) on the vacuum cleaner during work breaks. Press the…
How do I properly store and maintain my Metabo 600207840 Cordless Hammer?
Proper storage and maintenance of your Metabo 600207840 Cordless Hammer are essential for its longevity and optimal performance. Here are some guidelines: 1. Storage:…
How do I attach the rubber corners on the housing of the Metabo RWE 1020?
The Metabo RWE 1020 does not come with rubber corners on the housing. The rubber corners mentioned in the manual are for other models…
How do I change the threaded mandrel on the Metabo NMP 18 LTX BL M10 Cordless Rivet Nut Gun?
To change the threaded mandrel on the Metabo NMP 18 LTX BL M10 Cordless Rivet Nut Gun, follow these steps: 1. Remove the battery…
How do I clean the pleated filter of the Metabo ASA Series All-Purpose Vacuum Cleaner?
To clean the pleated filter, follow these steps: 1. Press the button labeled "PressClean" (4) on the vacuum cleaner during work breaks. Press the…
How do I insert and remove the battery in the Metabo UB18DJL Cordless Work Light?
To insert the battery, align it with the direction indicated as "A" on the unit and push it in until it clicks into place.…
How do I adjust the ON and OFF times for the pump?
To adjust the ON and OFF times for the pump, you can change the position of the float switch cable in the cable holder.…
How do I change the speed on the Metabo SBE 18 LTX Cordless Hammer Drill?
To change the speed on the Metabo SBE 18 LTX Cordless Hammer Drill, you need to use the thumb-wheel located on the tool. The…
How do I assemble the Metabo SPA 1200 Chip and Dust Extraction Unit?
To assemble the Metabo SPA 1200 Chip and Dust Extraction Unit, follow these steps: 1. Place the fan housing with the motor facing down…
How do I charge the battery pack for the metabo PowerMaxx KP Glue Gun?
To charge the battery pack for the metabo PowerMaxx KP Glue Gun, follow these steps: 1. Before using the glue gun, make sure to…
How do I attach the circular-cutting and parallel guide to the Metabo STEB 70 Quick Cordless Jigsaw?
To attach the circular-cutting and parallel guide to the jigsaw, follow these steps: 1. Place the clamping elements (a) on the footplate (5) with…
How do I set the cutting depth on the Metabo CS 23-355 Bench Grinder?
To set the cutting depth on the Metabo CS 23-355 Bench Grinder, follow these steps: 1. Free the lock nut on the cutting depth…