Why does my Ravemen FR300 battery drain completely within two days even when turned off?
Based on the RAVEMEN FR300 manual and the symptoms you described, there are a few factors to consider regarding your battery drain issue: Auto…
Manuals+ Q&A
Head Light questions & answers
Browse answered questions about Head Light, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I change the battery of the Scangrip I-MATCH 3 lamp?
According to the owner's manual for the SCANGRIP I-MATCH 3, the battery is not intended to be changed by the user during the product's…
I am having trouble finding 'shou' and 'Auo1' in the menu display and would like a tutorial video.
The manual for the PROHEL 3 Arm RGB Moving Head Light indicates that "Shou" is a menu option for selecting different operating modes, including…
How do I operate the PROHEL 3 Arm RGB Moving Head Light professionally, and are there video tutorials or direct support available?
To operate your PROHEL 3 Arm RGB Moving Head Light professionally, you can utilize its built-in modes or a DMX512 console for advanced control.…
Where can I find a tutorial video for the PROHEL 3 Arm RGB Moving Head Light?
While a specific official tutorial video is not provided within the manual, you can follow these steps to get started with your PROHEL 3…
How can I control multiple U King ZQ02100US units individually using the remote and a DMX console?
To control your U King ZQ02100US units individually, you must use different methods depending on whether you are using the remote or a DMX…
Why is my Stella Pro Reflex LCD panel blinking every second and failing to start?
If your Stella Pro Reflex OLED display is blinking and the unit will not start, please check the following troubleshooting steps based on the…
Why does my SCANGRIP I-MATCH 3 flash once when turned on even though the battery is charged?
Based on the SCANGRIP I-MATCH 3 manual, there are a few reasons why the light or its indicator LEDs might flash, which may explain…
How do I adjust the brightness level on the Adelante 6680 headlamp?
Yes, you can adjust the brightness level on the Adelante 6680 headlamp. It offers multiple lighting modes, including high, low, and strobe. To adjust…
How do I adjust the beam angle on the Energizer ENHDCA32E headlamp?
To adjust the beam angle on the Energizer ENHDCA32E headlamp, follow these steps: 1. Put the headlamp on your head and adjust the headband…
How do I switch between different lighting modes on the Lsnisni 3AAA-HL IPX5 Waterproof Head Light?
To switch between different lighting modes on the Lsnisni 3AAA-HL IPX5 Waterproof Head Light, simply press the power button. Each press of the power…
How do I change the light mode on the Energizer E303230400 IPX4 Water Resistant Head Light?
To change the light mode on the Energizer E303230400 IPX4 Water Resistant Head Light, follow these steps: 1. Locate the power button on the…
How do I set the DMX address for the ACME CM-250Z NEBULA Moving Head Light?
To set the DMX address for the , follow these steps: 1. Press the MENU button on the control panel until the DMX Address…
How do I set the DMX address for the CHAUVET PROFESSIONAL LED Moving Head Light?
To set the DMX address for the CHAUVET PROFESSIONAL COLORDASHPARH7XIP LED Moving Head Light, follow these steps: 1. **Access the Main Level Programming Levels:**…
How do I know if the PHILIPS Ultinon Pro H7-LED Car Head Light is compatible with my vehicle?
To determine the compatibility of the PHILIPS Ultinon Pro H7-LED Car Head Light with your vehicle, you need to follow these steps: 1. **Check…
How do I set up and control the deliya BEAM 260 Moving Head Light properly?
To set up and control the deliya BEAM 260 Moving Head Light properly, follow these steps based on the user manual: 1. **Installation:** Ensure…
How often should the PT-EML Series Emergency Lighting System be tested and for how long?
According to the product manual, the PT-EML Series Emergency Lighting System should be tested monthly for a minimum of 30 seconds and annually for…
How do I set up and operate the Sistema R2DSPOT200 200W Spot Moving Head Light?
**Setting Up:** 1. Unbox the Sistema R2DSPOT200 and ensure all included items are present: 1 x R2DSPOT200, 1 x Power cord, 2 x Mounting…
How do I properly connect the wires of the SATCO NUVO 60-518 Round Cage Bulk Head Light during installation?
1. **Identify Your House Wire Color:** Determine whether you have black or white house wires. 2. **For Black House Wire (Group A):** - Take…
How do I set up and operate the AUDIBAX IOWA 70 Disco Wash Moving Head Light?
To set up and operate the AUDIBAX IOWA 70 Disco Wash Moving Head Light, follow these steps: 1. **Power Connection:** - Connect the moving…